-
How do I modify Tulip network card driver for Knoppix
Hi all,
I have a need to modify the Tulip network card driver so that Knoppix will recognize my card. My questions are:
(1) I can't find the source code file for this driver. Where is it?
(2) How do I compile the code and install it (or whatever the correct terminology is) so that Knoppix can use it? (I need step-by-step instructions.)
(3) How can this be done since Knoppix is run from a CD and I obviously can't change the CD itself.
I know the edit that's required for the source code since I've read that elsewhere on the internet.
Thanks.
-
Senior Member
registered user
Re: How do I modify Tulip network card driver for Knoppix

Originally Posted by
rcpilot
I have a need to modify the Tulip network card driver so that Knoppix will recognize my card.
Are you sure you want to do this within Knoppix? Compiling and debugging drivers is challenging enough on a fully installed Linux distro, e.g. Debian, Red Hat, Gentoo, Mandrake, without the additional challenges Knoppix has.
Keep this in mind from Bumper-Sticker Computer Science:
[Thompson's Rule for First-Time Telescope Makers] It is faster to make a four-inch mirror and then a six-inch mirror than to make a six-inch mirror.
BTW, on a Debian install you can simply apt-get the sources. Similar ways exist on other distros. You can modify your apt sources under Knoppix, too.
Good luck and let us know how things go.
Regards,
- Robert
http://www.cwelug.org/
-
Senior Member
registered user
I helped you identify the problem with your network card. It is made by Microsoft and is tweaked by MS to not work with Linux. If you want this to work from the Knoppix CD then you should replace your network card with a one that works with Linux.
3Com 3c905b-tx will work with Linux & windows with no tweaking necessary. You can get it shipped to your house in most cases under $15.
http://www.pricegrabber.com/search_g...rch=3C905B-TX/
Or you can go to a local computer/office suppply store and buy a network card & try it out in the PC. If you don't like it or if it doesn't work, you can bring it back & get another one.
-
Okay guys, you've convinced me. I followed UnderScore's hyperlink and just ordered a 3Com 3C905-TX (no "B", hmmm) from Compuvest for a grand total of $12.05.
We'll see what happens.
Thanks! I'll report back with the results.
Similar Threads
-
By dboland9 in forum Networking
Replies: 0
Last Post: 05-11-2007, 08:34 PM
-
By pihhan in forum Hardware & Booting
Replies: 0
Last Post: 05-10-2006, 01:34 PM
-
By AHMED in forum Hardware & Booting
Replies: 1
Last Post: 12-24-2005, 01:45 PM
-
By franziski in forum Hardware & Booting
Replies: 0
Last Post: 06-03-2005, 10:23 PM
-
By gill1109 in forum Networking
Replies: 2
Last Post: 07-28-2003, 05:20 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Polycom VVX 411 12-Lines Desktop VoIP Phone (2200-48450-025)
$20.00

Grandstream WP810 Portable Cordless Wi-Fi IP Phone
$54.99

YEALINK T34W PHONE & 2 MONTHS OF PHONE SERVICE
$65.00

NEW Cisco IP Phone 7841-K9 4-Line VoIP Gigabit PoE CP-7841-K9
$49.95

Cisco CP-8861-K9 8861 VoIP IP Corded Phone Charcoal New 9 available
$118.00

Cisco/Linksys SPA2102 VoIP Phone Adapter Router 2FXS (Unlocked)
$17.99

*New* Yealink MP54-Teams Smart Business IP Phone, PoE, Touch Screen
$75.00

Cisco / Linksys SPA2102 VoIP 2FXS Phone Adapter with Router (unlocked)
$18.99

Grandstream HT801 v2 1 FXS, 1 Fast Ethernet New Version
$34.99

Lot of 35 Polycom VVX 300 & VVX400 IP Phones
$150.00