Results 1 to 4 of 4

Thread: problem with sata drive

  1. #1
    Junior Member
    Join Date
    Jul 2005
    Posts
    3

    problem with sata drive

    Hey guys ..
    i need some help ..its all gone with pete tong with my hdd ..
    i have an sata (200gig) and an pATA (just a normal ide) ((200 gig too)) drive ..
    the sata one was my old .. and it was running fine untill i bought the pATA drive
    ....
    i created a lvl 0 raid with both drives (plugged both onto the raid controller)
    activated raid in the bios.
    at this point the pc didnt boot from the sata drive anymore.
    even the drive hadnt been recognized at boot up ...
    well.. then i changed the sata drive from one sata connection to the other one on
    the raid controller (i have 2 of em)
    that didnt work either.
    then i tried just a raid with only the pATA drive... (i plugged the sATA drive on
    the onboard sata controller again) ... that didnt work either.
    ((dont ask me y i did it .. -.- ))
    changing the sata connection didnt wor either ..
    ...
    the partition table looked like this:
    C: 5 GB
    D: 25 GB
    E: 60 GB
    F: 5 GB
    G: 100 GB
    (all NTFS)
    ((all just on the SATA drive .... the pATA drive doesnt contain any datas))
    Well.. atm i just take care about the C partition ...
    (its normally a windoze pc but i wanna try to repair my system with knoppix)
    problem is ::::
    That i lost the partitiontable somehow (dunno how) ... and i dont know any
    solution to recover my datas ..
    I already successfully recovered a few files with a suckin windoze recovering
    tool... but i cannot recover all my data with it ..
    i created under knoppix a partition (sda1) about 5120 megabytes with a
    ntfs flag (?!)


    root@1[knoppix]# lspci -v
    0000:00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 0282
    Subsystem: Asustek Computer, Inc.: Unknown device 80a3
    Flags: bus master, 66MHz, medium devsel, latency 64
    Memory at e4000000 (32-bit, prefetchable) [size=32M]
    Capabilities: [80] AGP version 3.0
    Capabilities: [50] Power Management version 2
    Capabilities: [60] #08 [0060]
    Capabilities: [58] #08 [8001]

    0000:00:00.1 Host bridge: VIA Technologies, Inc.: Unknown device 1282
    Flags: bus master, medium devsel, latency 0

    0000:00:00.2 Host bridge: VIA Technologies, Inc.: Unknown device 2282
    Flags: bus master, medium devsel, latency 0

    0000:00:00.3 Host bridge: VIA Technologies, Inc.: Unknown device 3282
    Flags: bus master, medium devsel, latency 0

    0000:00:00.4 Host bridge: VIA Technologies, Inc.: Unknown device 4282
    Flags: bus master, medium devsel, latency 0

    0000:00:00.7 Host bridge: VIA Technologies, Inc.: Unknown device 7282
    Flags: bus master, medium devsel, latency 0

    0000:00:01.0 PCI bridge: VIA Technologies, Inc. VT8237 PCI bridge [K8T800 South] (prog-if 00 [Normal decode])
    Flags: bus master, 66MHz, medium devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    I/O behind bridge: 0000e000-0000efff
    Memory behind bridge: fbd00000-fbffffff
    Prefetchable memory behind bridge: e8000000-faffffff
    Capabilities: [80] Power Management version 2

    0000:00:07.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) (prog-if 10 [OHCI])
    Subsystem: Asustek Computer, Inc.: Unknown device 808a
    Flags: bus master, medium devsel, latency 64, IRQ 16
    Memory at fb800000 (32-bit, non-prefetchable) [size=2K]
    I/O ports at 9800 [size=128]
    Capabilities: [50] Power Management version 2

    0000:00:0a.0 Ethernet controller: Marvell Technology Group Ltd. Yukon Gigabit Ethernet 10/100/1000Base-T Adapter (rev 13)
    Subsystem: Asustek Computer, Inc.: Unknown device 811a
    Flags: bus master, 66MHz, medium devsel, latency 64, IRQ 17
    Memory at fba00000 (32-bit, non-prefetchable) [size=16K]
    I/O ports at a000 [size=256]
    Expansion ROM at fb900000 [disabled] [size=128K]
    Capabilities: [48] Power Management version 2
    Capabilities: [50] Vital Product Data

    0000:00:0d.0 Multimedia video controller: Brooktree Corporation Bt878 Video Capture (rev 11)
    Subsystem: Hauppauge computer works Inc. WinTV Series
    Flags: bus master, medium devsel, latency 64, IRQ 18
    Memory at e7e00000 (32-bit, prefetchable) [size=4K]
    Capabilities: [44] Vital Product Data
    Capabilities: [4c] Power Management version 2

    0000:00:0d.1 Multimedia controller: Brooktree Corporation Bt878 Audio Capture (rev 11)
    Subsystem: Hauppauge computer works Inc. WinTV Series
    Flags: bus master, medium devsel, latency 64, IRQ 5
    Memory at e7f00000 (32-bit, prefetchable) [size=4K]
    Capabilities: [44] Vital Product Data
    Capabilities: [4c] Power Management version 2

    0000:00:0f.0 RAID bus controller: VIA Technologies, Inc. VIA VT6420 SATA RAID Controller (rev 80)
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 20
    I/O ports at c000 [size=8]
    I/O ports at b800 [size=4]
    I/O ports at b400 [size=8]
    I/O ports at b000 [size=4]
    I/O ports at a800 [size=16]
    I/O ports at a400 [size=256]
    Capabilities: [c0] Power Management version 2

    0000:00:0f.1 IDE interface: VIA Technologies, Inc. VT82C586A/B/VT82C686/A/B/VT823x/A/C PIPC Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 32, IRQ 20
    I/O ports at fc00 [size=16]
    Capabilities: [c0] Power Management version 2

    0000:00:10.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 21
    I/O ports at c400 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 21
    I/O ports at c800 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.2 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 21
    I/O ports at d000 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.3 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 81) (prog-if 00 [UHCI])
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 21
    I/O ports at d400 [size=32]
    Capabilities: [80] Power Management version 2

    0000:00:10.4 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 86) (prog-if 20 [EHCI])
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 21
    Memory at fbc00000 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2

    0000:00:11.0 ISA bridge: VIA Technologies, Inc. VT8237 ISA bridge [K8T800 South]
    Subsystem: Asustek Computer, Inc. A7V600 motherboard
    Flags: bus master, stepping, medium devsel, latency 0
    Capabilities: [c0] Power Management version 2

    0000:00:11.5 Multimedia audio controller: VIA Technologies, Inc. VT8233/A/8235/8237 AC97 Audio Controller (rev 60)
    Subsystem: Asustek Computer, Inc.: Unknown device 812a
    Flags: medium devsel, IRQ 22
    I/O ports at d800 [size=256]
    Capabilities: [c0] Power Management version 2

    0000:00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    Flags: fast devsel
    Capabilities: [80] #08 [2101]

    0000:00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    Flags: fast devsel

    0000:00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    Flags: fast devsel

    0000:00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 NorthBridge
    Flags: fast devsel

    0000:01:00.0 VGA compatible controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (prog-if 00 [VGA])
    Subsystem: ATI Technologies Inc: Unknown device 0002
    Flags: bus master, stepping, 66MHz, medium devsel, latency 64, IRQ 11
    Memory at e8000000 (32-bit, prefetchable) [size=128M]
    I/O ports at e000 [size=256]
    Memory at fbe00000 (32-bit, non-prefetchable) [size=64K]
    Expansion ROM at fbd00000 [disabled] [size=128K]
    Capabilities: [58] AGP version 3.0
    Capabilities: [50] Power Management version 2

    0000:01:00.1 Display controller: ATI Technologies Inc Radeon R350 [Radeon 9800 Pro] (Secondary)
    Subsystem: ATI Technologies Inc: Unknown device 0003
    Flags: bus master, stepping, 66MHz, medium devsel, latency 64
    Memory at f0000000 (32-bit, prefetchable) [size=128M]
    Memory at fbf00000 (32-bit, non-prefetchable) [size=64K]
    Capabilities: [50] Power Management version 2
    Who can help me to get to my data? :/

  2. #2
    Junior Member
    Join Date
    Jul 2005
    Posts
    3
    can I restore my boot table with gpart?

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    It sounds like you took a formatted drive containing data and expected to make it part of a raid array without reformatting anything or reloading any data. And I would guess that you didn't make good backups either.

    In a nutshell, as you seem to be learning, that will not work. I wouldn't have expected an sata and and a older parallel IDE drive to work together in a raid zero array either. Generally you have to use similar drives for a stripped array, and I had never heard of a raid system that would let you use an SATA and an older IDE. I'm not 100% certain that you can't get away with it, I just don't expect it will work.

    As to the ability to recover, it depends on how much dammage was done to partition tables and the like. If you just hooked it up and quickly found that things were bad without running any partituon software, I would expect the partituion tables to have changed at all. But then they would be right when you disabled raid, and that doesn't seem to be the case or you wouldn't be asking. Or maybe the partitions are fine, and the data on the partirtions is now scrambled, which seems more likely. In that case gpart will not help you at all (it fixes partition tables, not all of the contents of the partitions). You might be able to recover some files with the Live Linux CD Helix, but you're going to have to do some work to get anything back.

  4. #4
    Junior Member
    Join Date
    Jul 2005
    Posts
    3
    what should I do now with Helix CD?

Similar Threads

  1. Recovering a XP SATA drive with Knoppix?
    By Random Lee in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 03-15-2007, 03:53 AM
  2. Mounting a SATA drive
    By netneo in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 09-22-2005, 01:32 PM
  3. Knoppix 4 on SATA DVD drive
    By jleroy in forum Knoppix DVD
    Replies: 1
    Last Post: 08-04-2005, 06:04 PM
  4. Sata DVD drive
    By lbenn in forum Hardware & Booting
    Replies: 2
    Last Post: 05-31-2005, 02:44 AM
  5. HDD Install on SATA Drive
    By arbeck in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 03-15-2004, 09:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


IBM System X3850-X5 Server w/4x Intel  Xeon E7-4870 CPU , 512 GB DDR3 RAM,NO HDD picture

IBM System X3850-X5 Server w/4x Intel Xeon E7-4870 CPU , 512 GB DDR3 RAM,NO HDD

$1299.99



IBM QRadar xx29 2x Xeon E5-2650v4 2x 900W PSU M5120 12x 3.5

IBM QRadar xx29 2x Xeon E5-2650v4 2x 900W PSU M5120 12x 3.5" Bay Server No RAM

$149.99



IBM ADP Server Type 7870 AC1 NO HDD | 128GB RAM PC3L | 2 x Xeon  E5620 picture

IBM ADP Server Type 7870 AC1 NO HDD | 128GB RAM PC3L | 2 x Xeon E5620

$199.99



Unused IBM 09P0037 MAINBOARD For  RS/6000 7044-170 P-Series picture

Unused IBM 09P0037 MAINBOARD For RS/6000 7044-170 P-Series

$375.00



IBM 02YC027 Seagate ST2400MM0129 2.4TB 10K SAS 12Gb/s 2.5

IBM 02YC027 Seagate ST2400MM0129 2.4TB 10K SAS 12Gb/s 2.5" Server Hard Drive

$200.00



IBM SYSTEM X3500 M3 SERVER 7380AC1 TOWER Server XEON E5620 8GB RAID SEE NOTES picture

IBM SYSTEM X3500 M3 SERVER 7380AC1 TOWER Server XEON E5620 8GB RAID SEE NOTES

$108.92



IBM 4262 SYSTEM x3200 Tower - HDD Wiped, NO OS picture

IBM 4262 SYSTEM x3200 Tower - HDD Wiped, NO OS

$80.00



IBM X3650 M5 5462-AC1,2 X E5-2640V3 2.6GHZ 8C, 16 GB, DUAL 750W, 2 X 1TB SERVER picture

IBM X3650 M5 5462-AC1,2 X E5-2640V3 2.6GHZ 8C, 16 GB, DUAL 750W, 2 X 1TB SERVER

$349.99



Lot of 2 IBM blade center Type H chassis 8852 picture

Lot of 2 IBM blade center Type H chassis 8852

$559.00



IBM 7915 AC1 M4 E27R704 Server Intel 2650V2 32GB RAM NO HDD w/ 2x 750w PSU picture

IBM 7915 AC1 M4 E27R704 Server Intel 2650V2 32GB RAM NO HDD w/ 2x 750w PSU

$250.00