Sounds like it takes a while to get your video card detected and drivers for it loaded. Vanta is Nvidia right and I assume that it IS in fact an AGP card? You could boot like this:
boot: knoppix xmodule=nv
Hi All,
as a newbie to Knoppix I am finding it very interesting but I have a problem I hope you can help with. When I boot (KNOPPIX_V3.2-2003-04-15-EN.iso), everything goes fine until the message AGP detected, at which point the system pauses for 3 to 4 minutes before continuing to a fully working system.
The system is a 600MHz Athelon with an AMD 751/756 chipset and a Vanta TNT graphics card.
Any help reducing this boot delay would be much appreciated.
Sounds like it takes a while to get your video card detected and drivers for it loaded. Vanta is Nvidia right and I assume that it IS in fact an AGP card? You could boot like this:
boot: knoppix xmodule=nv
Thanks for the suggestion, but it didn't help.
As I log out the text on the screen states the use of the NV module.
I'll try setting a persistant home to see if the system will pick up the settings from the last session.
Shaun

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1625.00
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Microsoft Windows Server 2025 Standard 64Bit 16 Core-50 CALs DVD With Key Sealed
$49.99
867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$245.00
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00
2U AI MINING SERVER 2x Xeon 36 cores 2.3Ghz DDR4 2x NVIDIA V100 GPU PCIe 2PS USA
$799.00
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00