Results 1 to 4 of 4

Thread: LinkSys WirelessG

  1. #1
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256

    LinkSys WirelessG

    Anyone have experience setting up one of these cards with the KNOPPIX 3.9 liveCD and/or hdinstall? This is a wireless router combo with a USB card. I tried

    Code:
    iwconfig ath0 key xxxxxxxxxx
    iwconfig ath0 essid "xxxxxxxxxx"
    and got the following errors:

    Error for wireless request "Set Encode" (8B2A) :
    SET failed on device ath0 ; No such device.

    Error for wireless request "Set ESSID" (8B1A) :
    SET failed on device ath0 ; No such device.


    What can I do about this?

    TIA,
    AJG

  2. #2
    Junior Member
    Join Date
    Sep 2005
    Posts
    9
    what is the output of ifconfig, iwconfig and lspci? knoppix has no idea what ath0 is on your box it seems, you can try if there's an eth0 or better yet wlan0 entry(i.e. replace ath0 with wlan0 and eth0 to see if one of those work). more details you post the better.

  3. #3
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    OK you asked for it, here goes nothing:

    iwconfig=
    lo no wireless extensions.

    eth0 no wireless extensions.

    ifconfig=
    lo Link encap:Local Loopback
    inet addr:127.0.0.1 Mask:255.0.0.0
    UP LOOPBACK RUNNING MTU:16436 Metric:1
    RX packets:10 errors:0 dropped:0 overruns:0 frame:0
    TX packets:10 errors:0 dropped:0 overruns:0 carrier:0
    collisions:0 txqueuelen:0
    RX bytes:500 (500.0 b) TX bytes:500 (500.0 b)

    lspci=
    0000:00:00.0 Host bridge: Intel Corp. 82865G/PE/P DRAM Controller/Host-Hub Interface (rev 02)
    0000:00:02.0 VGA compatible controller: Intel Corp. 82865G Integrated Graphics Device (rev 02)
    0000:00:1d.0 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #1 (rev 02)
    0000:00:1d.1 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #2 (rev 02)
    0000:00:1d.2 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #3 (rev 02)
    0000:00:1d.3 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB UHCI #4 (rev 02)
    0000:00:1d.7 USB Controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) USB2 EHCI Controller (rev 02)
    0000:00:1e.0 PCI bridge: Intel Corp. 82801 PCI Bridge (rev c2)
    0000:00:1f.0 ISA bridge: Intel Corp. 82801EB/ER (ICH5/ICH5R) LPC Bridge (rev 02)
    0000:00:1f.1 IDE interface: Intel Corp. 82801EB/ER (ICH5/ICH5R) Ultra ATA 100 Storage Controller (rev 02)
    0000:00:1f.2 IDE interface: Intel Corp. 82801EB (ICH5) Serial ATA 150 Storage Controller (rev 02)
    0000:00:1f.3 SMBus: Intel Corp. 82801EB/ER (ICH5/ICH5R) SMBus Controller (rev 02)
    0000:00:1f.5 Multimedia audio controller: Intel Corp. 82801EB/ER (ICH5/ICH5R) AC'97 Audio Controller (rev 02)
    0000:01:0c.0 Ethernet controller: Intel Corp. 82540EM Gigabit Ethernet Controller (rev 02)

    Thanx,
    AJG

  4. #4
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY, USA
    Posts
    1,256
    BUMP!!!

    Any ides out there would be welcome!

    TIA,
    AJG

Similar Threads

  1. Linksys WUSB11
    By oloompa in forum Hardware & Booting
    Replies: 10
    Last Post: 11-11-2006, 10:11 AM
  2. Linksys WUSB11 v2.6.....again...sorry
    By Duncanla in forum Networking
    Replies: 1
    Last Post: 11-24-2004, 02:25 AM
  3. Yet another linksys problem
    By spartn119 in forum Networking
    Replies: 0
    Last Post: 09-25-2004, 08:09 PM
  4. Linksys 11wcp v.3
    By lnetubaplyr in forum Networking
    Replies: 0
    Last Post: 11-20-2003, 04:02 PM
  5. linksys lancard
    By dox in forum Hardware & Booting
    Replies: 1
    Last Post: 08-28-2003, 03:28 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00



Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD picture

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD

$119.99



Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working picture

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working

$149.99



Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB

$149.99



NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER picture

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER

$1499.97



Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays picture

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays

$799.99



LOT (8) Cisco UCS UCSB-B200-M5  2x6248R  24 core 3.0G   24x64g DDR4-2933 ram picture

LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram

$112000.00



Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R picture

Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R

$399.00



Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR picture

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR

$96.60



Dell Poweredge VRTX 25Bay 2.5

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS

$578.08