Reply With Quote3.7 had dma on by default. Try knoppix nodma at the prompt. Otherwise follow the documentation link near the top of this page and read the cheat codes section for other codes that you can try.
I just got the 3.7 cd and tried to live boot but only got about three lines in. the last two lines were knoppix finding my cdrom (samsung) and then it froze while working with /dev/sdc.
3.7 had dma on by default. Try knoppix nodma at the prompt. Otherwise follow the documentation link near the top of this page and read the cheat codes section for other codes that you can try.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Posting Permissions
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 - 4X S25G NICs
$1999.97
Lot of 3 Dell PowerEdge Blade Server HHB005 x2 HHB006 x1
$256.49
Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08
LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram
$112000.00
Dell PowerEdge VRTX Rackmount Chassis w/4x PSUs 2x CMC Modules
$399.98
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99
Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99
Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60