-
Junior Member
registered user
Knoppix 4.0.2 DVD running on AMD 64 X2 Dual Core.
Knoppix is really great/awesome.
I'm using an Asrock 939 dual-sata2 board with an AMD64 X2 3800+ and Knoppix 4.0.2 booted it as SMP. Two Penguins instead of one. Now all I have to do is find out how to get FedoraC4 to present me with an SMP kernel on my 80GB HD (master on IDE1) and then get Grub to let me boot from Knoppix on my 20GB hard drive (slave on IDE1).
ASROCK dual sata2 board
AMD 64 X2 3800+
Thermalright si-120 Heatsink with 120cm fan.
768MB pc-3200 ram
Not a speed demon, but stable. Knoppix made the installation easier. I was able to check out the system before I let Fedora boot up the new equipment.
-
Senior Member
registered user
>>
Now all I have to do is find out how to get FedoraC4 to present me with an SMP kernel on my 80GB HD (master on IDE1)
>>
Down load the kernel source rpm. read through the README file, run configure, select smp support and compile/install the new kernel. Easy as that.
Suggesting you dload from the Fedora site incase there are specialised kernel patches involved for that distro. If not, just go to www.kernel.org and grab source from there.
jm
-
Junior Member
registered user
After waiting several days before installing a Fedora C4 SMP kernel, yum update gave me one in the normal routine of updating. A few days after that yum update supplied me with another SMP kernel. The amazing thing is that the Knoppix/Debian SMP kernel is stable and the Fedora C4 SMP kernels are both flakey. They are unstable when the Firefox or Opera browser are used and the mouse and keyboard are erratic.
F@H runs on both of the FC4 SMP kernels, but the clock is highly inaccurate. On Knoppix the clock is right on the money.
-
Senior Member
registered user
FC is a community aka testing release ... at least deb keeps their unstable branch labled as "unstable" ....
>>
F@H runs on both of the FC4 SMP kernels ...
>>
I don't quite understand that ?, the "F@H" bit that is ... any Linux should run on any kernel, all things being equal that is ... ie; special patch requirements etc ... i have noticed a few issues on FC4 though. I think they originally forgot to include all the required libs when it first came out ...(very_big_grin.png)
Sounds like a good result in the end though 
jm
Similar Threads
-
By GeeIJoe999 in forum Hardware & Booting
Replies: 2
Last Post: 12-02-2007, 11:01 PM
-
By rossi in forum Hardware & Booting
Replies: 5
Last Post: 05-28-2006, 03:41 PM
-
By spydaman27 in forum Hardware & Booting
Replies: 0
Last Post: 03-25-2006, 01:38 AM
-
By nicorelli in forum General Support
Replies: 0
Last Post: 07-01-2004, 12:09 AM
-
By xf.7er in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 07-29-2003, 03:43 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Crucial MX500 1TB 2.5" SATA III Internal SSD CT1000MX500SSD1
$99.99

Samsung 2.5" 870 EVO SSD SATA III 250GB 500GB 1TB Internet Solid State Drive Lot
$60.00

Netac 2TB 1TB 512GB 256GB Internal SSD 2.5inch SATAIII Solid State Drive lot
$1090.00

Micron MTFDDAK256TBN 256 GB, Internal ,2.5" SSD
$23.00

Crucial MX500 250GB 2.5" SATA III SSD - Preowned
$29.00

Samsung 256 GB Internal SATA SSD Fully Tested 50%-79% Health
$24.00

2 PACK 128 GB SSD M.2 2280 SATA Solid State Drive Major Brands, Samsung, LiteON
$28.00

Fanxiang 256GB 512GB 1TB 2TB 4TB SSD Lot 2.5'' SATA Internal Solid State Drive
$42.99

Samsung New SSD 970 EVO Plus 2TB 1TB 500GB 250GB NVMe M2 Internal Hard Drive Lot
$79.99

Netac 120GB 256GB 1TB 2TB Internal SSD 2.5'' SATAIII 6Gb/s Solid State Drive lot
$119.99