-
Junior Member
registered user
Knoppix 4.0.2 DVD running on AMD 64 X2 Dual Core.
Knoppix is really great/awesome.
I'm using an Asrock 939 dual-sata2 board with an AMD64 X2 3800+ and Knoppix 4.0.2 booted it as SMP. Two Penguins instead of one. Now all I have to do is find out how to get FedoraC4 to present me with an SMP kernel on my 80GB HD (master on IDE1) and then get Grub to let me boot from Knoppix on my 20GB hard drive (slave on IDE1).
ASROCK dual sata2 board
AMD 64 X2 3800+
Thermalright si-120 Heatsink with 120cm fan.
768MB pc-3200 ram
Not a speed demon, but stable. Knoppix made the installation easier. I was able to check out the system before I let Fedora boot up the new equipment.
-
Senior Member
registered user
>>
Now all I have to do is find out how to get FedoraC4 to present me with an SMP kernel on my 80GB HD (master on IDE1)
>>
Down load the kernel source rpm. read through the README file, run configure, select smp support and compile/install the new kernel. Easy as that.
Suggesting you dload from the Fedora site incase there are specialised kernel patches involved for that distro. If not, just go to www.kernel.org and grab source from there.
jm
-
Junior Member
registered user
After waiting several days before installing a Fedora C4 SMP kernel, yum update gave me one in the normal routine of updating. A few days after that yum update supplied me with another SMP kernel. The amazing thing is that the Knoppix/Debian SMP kernel is stable and the Fedora C4 SMP kernels are both flakey. They are unstable when the Firefox or Opera browser are used and the mouse and keyboard are erratic.
F@H runs on both of the FC4 SMP kernels, but the clock is highly inaccurate. On Knoppix the clock is right on the money.
-
Senior Member
registered user
FC is a community aka testing release ... at least deb keeps their unstable branch labled as "unstable" ....
>>
F@H runs on both of the FC4 SMP kernels ...
>>
I don't quite understand that ?, the "F@H" bit that is ... any Linux should run on any kernel, all things being equal that is ... ie; special patch requirements etc ... i have noticed a few issues on FC4 though. I think they originally forgot to include all the required libs when it first came out ...(very_big_grin.png)
Sounds like a good result in the end though 
jm
Similar Threads
-
By GeeIJoe999 in forum Hardware & Booting
Replies: 2
Last Post: 12-02-2007, 11:01 PM
-
By rossi in forum Hardware & Booting
Replies: 5
Last Post: 05-28-2006, 03:41 PM
-
By spydaman27 in forum Hardware & Booting
Replies: 0
Last Post: 03-25-2006, 01:38 AM
-
By nicorelli in forum General Support
Replies: 0
Last Post: 07-01-2004, 12:09 AM
-
By xf.7er in forum Hdd Install / Debian / Apt
Replies: 8
Last Post: 07-29-2003, 03:43 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

G-Technology G-RAID 24TB Dual-Drive External HDD TB3 USB 3.1 7200RPM Silver
$299.99

OWC Mercury Elite Pro 2 Bay RAID Enclosure with USB 3.2 for Dual 3.5 inch HDDs
$87.99

Broadcom 9600-24i RAID Controller PCIe Gen 4.1 Tri-Mode NEW 05-50111-01004
$649.99

Intel VROC Premium RAID Controller Card PCIe Add-On Module VROCPREMMOD
$265.00

2-Bay/4-Bay Hard Drive Enclosure for 3.5"/2.5'' SATA HDD/SSD 10Gbps USB-C 3.2
$75.99

Acasis USB 3.2 2 Bay HDD RAID Enclosure for 2.5/3.5" SATA Drives External Array
$55.00

MegaRAID 9580-8i8e 16-port 12G SAS/SATA/NVMe 8GB PCIe RAID - 05-50076-00
$1619.19

Dell PowerEdge HBA330 LP PCI-E 12GBs RAID SAS Controller Adapter J7TNV
$18.95

Intel® Integrated RAID Mezzanine Module RMS3HC080 SAS/SATA H24093-204
$24.97

CalDigit VR minin 2 Portable Raid Storage On The Go
$75.00