Knoppix 4.02 doesn't recognize USB port

[klifnor]

In attempting to add a new DVD writer to my system, I find that the V2.0 USB port on the USB card is not recognized by Knoppix 4.02 CD.

The USB data is as follows; the first three items are recognized, but the V2.0 port, which is what I want to use, is not. usbview does not list the V2.0 port, although it lists the three V1.0 ports, all of which function.

Thanks for any suggestions.

Klifnor

----------

USB data:

0000:00:03.0 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev
0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b29
Flags: bus master, medium devsel, latency 32, IRQ 20
Memory at e1104000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.1 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev
0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b29
Flags: bus master, medium devsel, latency 32, IRQ 21
Memory at e1100000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev
0f) (prog-if 10 [OHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b29
Flags: bus master, medium devsel, latency 32, IRQ 22
Memory at e1101000 (32-bit, non-prefetchable) [size=4K]

0000:00:03.3 USB Controller: Silicon Integrated Systems [SiS] USB 2.0 Controller (pro
g-if 20 [EHCI])
Subsystem: Elitegroup Computer Systems: Unknown device 1b29
Flags: bus master, medium devsel, latency 32, IRQ 9
Memory at e1102000 (32-bit, non-prefetchable) [size=4K]
Capabilities: <available only to root>

[Markus]

Try "sudo modprobe ehci-hcd" and see with "dmesg" if it's recognized.

[klifnor]

Try "sudo modprobe ehci-hcd" and see with "dmesg" if it's recognized.

I

Thx for the suggestion. The driver wasn't installed. For anyone who has a similar problem, with root privileges do:

insmod /KNOPPIX/lib/modules/2.6.12/kernel/drivers/usb/host/ehci-hcd.ko

klifnor