Results 1 to 3 of 3

Thread: Soltek SL-75FRV mainbord not recognized

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    2

    Soltek SL-75FRV mainbord not recognized

    Soltek SL-75FRV mainbord not recognized
    Here's the lspci output.

    hobbit:~# lspci -v
    00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189
    Subsystem: VIA Technologies, Inc.: Unknown device 0000
    Flags: bus master, 66Mhz, medium devsel, latency 8
    Memory at e0000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [a0] AGP version 2.0
    Capabilities: [c0] Power Management version 2

    00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b168 (prog-if 00 [Normal decode])
    Flags: bus master, 66Mhz, medium devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: dde00000-dfefffff
    Prefetchable memory behind bridge: cdd00000-ddcfffff
    Capabilities: [80] Power Management version 2

    00:10.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. UHCI USB
    Flags: bus master, medium devsel, latency 32, IRQ 11
    I/O ports at e800 [size=32]
    Capabilities: [80] Power Management version 2

    00:10.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. UHCI USB
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at ec00 [size=32]
    Capabilities: [80] Power Management version 2

    00:10.3 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 82) (prog-if 20)
    Subsystem: VIA Technologies, Inc.: Unknown device 3104
    Flags: bus master, medium devsel, latency 32, IRQ 10
    Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2

    00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3177
    Subsystem: VIA Technologies, Inc.: Unknown device 0000
    Flags: bus master, stepping, medium devsel, latency 0
    Capabilities: [c0] Power Management version 2

    00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Subsystem: VIA Technologies, Inc. Bus Master IDE
    Flags: bus master, medium devsel, latency 32, IRQ 14
    I/O ports at fc00 [size=16]
    Capabilities: [c0] Power Management version 2

    00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50)
    Subsystem: Avance Logic Inc.: Unknown device 4720
    Flags: medium devsel, IRQ 5
    I/O ports at e400 [size=256]
    Capabilities: [c0] Power Management version 2

    01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev b2) (prog-if 00 [VGA]) Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
    Memory at de000000 (32-bit, non-prefetchable) [size=16M]
    Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Expansion ROM at dfef0000 [disabled] [size=64K]
    Capabilities: [60] Power Management version 2
    Capabilities: [44] AGP version 2.0

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933
    What happens when you boot? Have you changed anything in the BIOS? What cheat codes are you using?

  3. #3
    Senior Member registered user
    Join Date
    Jan 2003
    Location
    Texas
    Posts
    139
    Yeah the "not recognized" part that you mentioned doesn't really tell us what you mean. Preferably you could tell us what it does during boot. Such as "Hangs during hardware probe" or kernel panics or something like that.

Similar Threads

  1. soltek mainboard Network driver
    By bennettr in forum Networking
    Replies: 0
    Last Post: 03-19-2004, 10:54 AM
  2. 3.06 HT cpu not recognized ?
    By Kluk-Kluk in forum Hardware & Booting
    Replies: 0
    Last Post: 08-11-2003, 09:51 AM
  3. wlan only sometimes recognized
    By cbr in forum Networking
    Replies: 2
    Last Post: 07-29-2003, 09:28 PM
  4. USB not recognized
    By SerenityNet in forum Hardware & Booting
    Replies: 7
    Last Post: 04-26-2003, 04:00 PM
  5. Zipdrive not recognized
    By merlin in forum Hardware & Booting
    Replies: 8
    Last Post: 03-20-2003, 02:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco SFP-10G-SR Transceiver picture

Cisco SFP-10G-SR Transceiver

$4.00



Lot of 13 Genuine Cisco SFP-10G-SR-S 10-3105-01 SFP+ Transceiver NEW SEALED picture

Lot of 13 Genuine Cisco SFP-10G-SR-S 10-3105-01 SFP+ Transceiver NEW SEALED

$200.00



Qty 20 New Cisco QSFP-100G-FR-W2 10-3659-01 Module Hologram Brand New 20 Pack picture

Qty 20 New Cisco QSFP-100G-FR-W2 10-3659-01 Module Hologram Brand New 20 Pack

$260.00



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99



Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA picture

Intel X520-DA2 10Gb 10Gbe 10 Gigabit Network Adapter NIC Dual Port E10G42BTDA

$28.94



HP 669279-001 560SFP+ Ethernet 10Gb 2-Port Network Adapter Card W/SFPx2 -Both picture

HP 669279-001 560SFP+ Ethernet 10Gb 2-Port Network Adapter Card W/SFPx2 -Both

$14.99



SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT picture

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT

$7.99



10Gb SFP+ to RJ45 Module Copper Cat6 Transceiver Compatible w/5Gb/ 2.5Gb/ 1Gb picture

10Gb SFP+ to RJ45 Module Copper Cat6 Transceiver Compatible w/5Gb/ 2.5Gb/ 1Gb

$31.95



SFP QSFP Transceivers Programmer allows to corning and (re)programming sfp code picture

SFP QSFP Transceivers Programmer allows to corning and (re)programming sfp code

$108.09



Cisco SFP-10G-SR-S Transceiver Module 10-3105-01 picture

Cisco SFP-10G-SR-S Transceiver Module 10-3105-01

$100.00