-
Step 3i: used QT-Parted to delete all but the first partition containing my irreplaceable programs.
Note: drive hda is the Hitachi CD-Rom, according to QT-Parted.
Hard Boot
used QT-Parted to create a second partition, about 2G in length.
tried to use QT-Parted to create a third partion. QT-Parted crashed.
Hard Boot
used QT-Parted to create a second partition, ext3, about 2G in length.
committed change and exited QT-Parted.
restarted QT-Parted and created a third partition, ext3, about 12.6G in length.
committed change and exited QT-Parted.
restarted QT-Parted and created a fourth and final partition, linux-swap, about .996G.
committed change.
formatted second partition as ext3.
committed change.
formatted third partition as ext3.
committed change.
exited QT-Parted.
Hard Boot.
restarted KNOPPIX.
mounted partition 3, marked as readable, marked as read/write/.
tried to copy the .bat file off the KNOPPIX disc onto partition 3.
Failed. Could not create the new .bat file.
opened console.
cut and pasted previous suggestion.
result.text contents posted below
__________________________________________________ ______
+ cat /etc/knoppix-version
4.0.2 2005-09-12
+ cat /proc/partitions
major minor #blocks name
33 0 20094480 hde
33 1 5116671 hde1
33 2 779152 hde2
33 3 1333395 hde3
33 4 12860032 hde4
240 0 1942016 cloop0
+ cat /etc/fstab
/proc /proc proc defaults 0 0
/sys /sys sysfs noauto 0 0
/dev/pts /dev/pts devpts mode=0622 0 0
/dev/fd0 /mnt/auto/floppy auto user,noauto,exec,umask=000 0 0
/dev/cdrom /mnt/auto/cdrom auto user,noauto,exec,ro 0 0
/dev/cdrom1 /mnt/auto/cdrom1 auto users,noauto,exec,ro 0 0
# Added by KNOPPIX
/dev/hde1 /mnt/hde1 vfat noauto,users,exec,umask=000,uid=knoppix,gid=knoppi x 0 0
# Added by KNOPPIX
/dev/hde2 /mnt/hde2 auto noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hde3 /mnt/hde3 ext3 noauto,users,exec 0 0
# Added by KNOPPIX
/dev/hde4 /mnt/hde4 ext3 noauto,users,exec 0 0
+ sudo fdisk -l /dev/hda /dev/hdb /dev/hdc /dev/hdd /dev/hde /dev/hdf /dev/hdg /dev/hdh
Disk /dev/hda doesn't contain a valid partition table
Note: sector size is 2048 (not 512)
Disk /dev/hda: 728 MB, 728195072 bytes
255 heads, 63 sectors/track, 22 cylinders
Units = cylinders of 16065 * 2048 = 32901120 bytes
Disk /dev/hde: 20.5 GB, 20576747520 bytes
255 heads, 63 sectors/track, 2501 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Device Boot Start End Blocks Id System
/dev/hde1 * 1 637 5116671 c W95 FAT32 (LBA)
/dev/hde2 638 734 779152+ 83 Linux
/dev/hde3 735 900 1333395 83 Linux
/dev/hde4 901 2501 12860032+ 83 Linux
__________________________________________________ _________
Similar Threads
-
By alpha_geek in forum Hardware & Booting
Replies: 1
Last Post: 05-22-2007, 04:17 PM
-
By staran in forum Hardware & Booting
Replies: 1
Last Post: 01-18-2007, 05:41 PM
-
By beausimon in forum General Support
Replies: 6
Last Post: 04-23-2006, 03:40 PM
-
By frugalyankee in forum MS Windows & New to Linux
Replies: 2
Last Post: 02-09-2005, 03:48 AM
-
By merc in forum Customising & Remastering
Replies: 3
Last Post: 05-23-2003, 11:00 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell Poweredge R810 4x Xeon X7560 2.26ghz 32-Cores | 256GB | 3x Trays | H700
$289.99

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99

Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU
$315.00

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99