No hard drive required (except on very old systems with 64 meg of memory or less where a swap file may be needed to bring up the KDE GUI).
I have searched but not found an answer that completely statisfies me regarding the following question:
Does Knoppix require a hard drive to be present in the computer where it will be used, or will it run anyway without one?
This question might seem absurd, but I just want to make sure.![]()
No hard drive required (except on very old systems with 64 meg of memory or less where a swap file may be needed to bring up the KDE GUI).
---
Verifying of md5 checksum and burning a CD at slow speed are important.
i have yet to use my swap file. ^_^
1 gig of memory is fun.
How do you tell the size and usage of the swap file?Originally Posted by Kowood
Ilan
cat /proc/meminfo (is one way).

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Core | HBA330 | No RAM or HDD
$149.99
Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU
$315.00
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00
Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99