-
Can I use Knoppix??
I read the minimum system requirements for Knoppix on the site, but was wondering, with these specs, will I have good quality?
AMD 3500+ (Roughly 2.2 GHz)
192 RAM (512 total 256 taken up by video, dont know about the other part...its a compaq =(
200 GB HDD
Thanks
-
Senior Member
registered user
wow! i have used knoppix on PII@233Mhz and 128M ram just fine. so your should work great
-
Thanks for the quick response.
-
How about a laptop with a dead (primary)cd drive
-
Da Cider:
I am studying the possibility of copyng the entire CD on a flash card and use it in the PCMCIA port of my old laptop(using a CF to PCMCIA adapter), and telling the BIOS to boot first from there. It is easier said than done, but worth a try as son as I get a CF card big enough. If your laptop has a USB port, and the BIOS allows to boot from there, use a jump drive to try it out! It could work, it could not, but it is worth a try!
Gabriel
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

SFP TO RJ45 TRANSCEIVER SFP MODULE COPPER SFP OPTICAL PORT TO RJ45 ETHERNET PORT
$7.99

Finisar Copper SFP 1Gbps Transceiver Module FCLF8522P2BTL (34 total)
$680.00

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*
$24.00

Cisco Meraki MA-SFP-1GB-SX Network Tranceiver Module
$89.00

Genuine Cisco SFP-10G-SR 0-2415-03 10 Gigabit Transceiver
$5.40

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50

Dell Mellanox ConnectX-4 Lx CX4121C Dual 25GbE SFP28 LP | 20NJD
$25.00

HP 560SFP+ 10GB 2-port PCIe NIC Ethernet ADAPTER 669279-001 w/ (2) 10GB SFP+
$16.99

LOT of 10 DELL DPN: 0XYD50 | Intel FTLX8574D3BCV-IT 10G SFP+SR 850nm LC SFP
$45.00

Netgear ProSafe AGM732F 1000BASE-LX SFP 1310nm GBIC Module NEW SEALED
$80.00