Results 1 to 8 of 8

Thread: DVD locks on Boot

Hybrid View

  1. #1

    DVD locks on Boot

    I downloaded ISO of 4.? DVD using bittorrent. The checksum shows good. I burned it twice , second time at slowest speed possible. When I boot from DVD (Win 2000 Pro)I see the littel penguin, then the screen says "checking for for USB" (yes two for's) and it just hangs there.

    Any help would be appreciated.

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    You might try reading the wiki on cheat codes. An obvious cheat code to try would be nousb. While you likely will want USB to work, this might help determine if USB is really the source of the problem. Another good canidate would be acpi=off or noacpi. Also setpping through an expert mode boot and seeing exactly where the hang happens and changing your answer to the question right before the hang can help locate problems too.

  3. #3
    Senior Member registered user
    Join Date
    Nov 2002
    Location
    Long Island, NY USA
    Posts
    1,510
    Knoppix boots with a splash screen.

    At that splash screen you can enter codes which will force Knoppix to do certan things. Theses codes are known as Cheat Codes. You should try:
    knoppix nousb

  4. #4
    Thanks I will try it. But, I forgot to mention that it boots OK with the CD (vs DVD). Does this mean USB is not the issue?

  5. #5
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rocksonrocks
    Thanks I will try it. But, I forgot to mention that it boots OK with the CD (vs DVD). Does this mean USB is not the issue?
    This sounds very much like a bad burn (or marginal hardware), as the OS on both CD and DVD should be the same.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  6. #6
    The CD is a different version (3.??). It doesn't seem to show this message ("checking for for USB")ever, unless it's too fast for me to see. I tried to burn the DVD slowest possible. I'll try different media or maybe an older DVD version.

    Thanks,

  7. #7
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rocksonrocks
    The CD is a different version (3.??)....
    Well that changes everything, doesn't it? I even thought about asking about this, but figured it would be condescending to ask, I didn't think you would have made the above statement about the CD booting and not bother to mention a version difference if there was one. Back to my original advice. Or download the CD version of 4.0.2 and try it. It's always handy to have a CD version available, since you may need it for a system recovery on a system that has no DVD. I use the DVD on my notebook, but carry the CD in my set of emergency discs. No need to make a CD every single release, but there is enough new in 4.0.2 to merit doing it. (Your present experience indicates it might be wise to carry both versions.)

  8. #8
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by rocksonrocks
    I'll try different media or maybe an older DVD version.
    The only other official downloadable DVD version is 4.0.1, very close to 4.0.2 but with known bugs. Don't bother with it.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

Similar Threads

  1. Locks up shortly after boot
    By y2khardtop in forum Hardware & Booting
    Replies: 4
    Last Post: 12-29-2005, 10:58 PM
  2. doesnt' always boot, locks up randomly
    By black_out in forum General Support
    Replies: 1
    Last Post: 06-09-2005, 04:33 PM
  3. 3.7 will not boot - locks at /etc/fstab
    By raydance in forum General Support
    Replies: 1
    Last Post: 12-23-2004, 09:40 PM
  4. 3.3 boot stops and locks.
    By alex+ in forum Hdd Install / Debian / Apt
    Replies: 6
    Last Post: 01-20-2004, 01:13 PM
  5. 3.3 boot stops and locks
    By alex+ in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 12-27-2003, 05:15 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R620 2x Xeon E5-2630 v2 3.1GHz 2.5

Dell PowerEdge R620 2x Xeon E5-2630 v2 3.1GHz 2.5" 4-BAY 32GB RAM No OS 2x 495w

$174.95



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell Poweredge R720 8SFF 2.5

Dell Poweredge R720 8SFF 2.5" 2x Xeon E5-2680 v2 2.8GHz 20-Cores 64gb 4x Trays

$259.99



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell Poweredge R720 8SFF 2.5

Dell Poweredge R720 8SFF 2.5" x Xeon E5-2680 v2 2.8GHz 20-Cores 128gb 4x Trays

$349.99



Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Core | 32GB | HBA330 | 2x 1100w picture

Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Core | 32GB | HBA330 | 2x 1100w

$359.99



Dell PowerEdge R640  8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU picture

Dell PowerEdge R640 8xSFF Server Barebone 2 x Heat Sink w / 2x 1100W PSU

$315.00



Dell Poweredge T420 SFF 2x E5-2430 v2 2.5Ghz / 64gb / H710 / 8x Trays / 2x 495w picture

Dell Poweredge T420 SFF 2x E5-2430 v2 2.5Ghz / 64gb / H710 / 8x Trays / 2x 495w

$394.99



Dell R640 Diskless Servers 2x Gold 18-Cores 6254 3.10GHz CPU, 32gb RAM, No Raid picture

Dell R640 Diskless Servers 2x Gold 18-Cores 6254 3.10GHz CPU, 32gb RAM, No Raid

$699.00



Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD picture

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD

$99.99