after many attempts, i still cant get my monitor to work!

[cozzy]

thanks for your help henk, I tried all in your last message, to no avial
I'm gonna try and sound a bit more desperate by listing my problem under the heading

"im gonna have to buy red hat!"

and see if I can get any joy.
Meantime, if you come up with anything, please let me know!

Cozzy

[eadz]

tried failsafe and expert?

tried testcd ?

In rare cases, linux won't work with your processor / mb. If nothing else works, try downloading something like the debian install CD ( 30 mb ) and see if that boots. It may be a bug in the way the kernel is configured.

Is your cpu overclocked? Check in the bios, if you have plug&play OS turn it off. If you have an OS selection, change it to UNIX ( newer MB's ).

[cozzy]

tried failsafe and expert.

got a black screen with lots of writing,
but I did notice "SMP motherboard not dected" 2 lines from the bottom
the screen then froze, no keys worked, and I had to reset.

in bios, I changed Plug and Play aware o/s to 'no'

same result

reading the motherboard manual:
my motherboard is a pc ddr266 systemboard m825 series
has a km266chipset that supports 4x AGP slot, 100/133 MHz DDR/SDR
The mainboard has the built-in AC97 Codec, and CNR slot and a built-in 10BaseT/100BaseTX Network interface
Has the 128-bit 2D/3D AGP graphics accelerator with 32mb frame buffer, suppoorting AGP 4X 266MHz mode up to 1GB/s bandwidth.

hope this helps

thanks for all the assistance

Cozzy

[rickenbacherus]

tried failsafe and expert.

got a black screen with lots of writing,
but I did notice "SMP motherboard not dected" 2 lines from the bottom
the screen then froze, no keys worked, and I had to reset.
Cozzy

Did you boot:

knoppix nosmp

Have you disabled IRQ sharing in the BIOS?
Do you have another monitor to try out?

[iconfly]

Are you sure this is not a problem withyour cd? Could be the cd drive or the cd missreading? Have you tried another monitor, or video card?
Good luck. Jimmy