If you are using an onboard graphics processor that uses shared memory, that amount will be deducted from the total available.
This is usually adjustable in the BIOS.
I've combed the FAQ and older board topics and couldn't find the answer to this, so...
When I boot Knoppix everything goes fine, except when the thing is about to load, a message pops up that says I need at least 84 MB of memory. Then, a box pops up (what I'm guessing is the console or something) and there is no desktop GUI like my friend's Knoppix has.
Do I just not have enough RAM? I have 128 MB. (yes, laugh, it's funny)
Thanks in advance.
If you are using an onboard graphics processor that uses shared memory, that amount will be deducted from the total available.
This is usually adjustable in the BIOS.
Alright, I'll check that out as soon as possible. Thanks!

Gigabyte 4U AI Server 10x Nvidia GPU 2x Xeon Gold 6150 36 Core 2.7GHz DDR4 RAM
$1499.00
Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00
Dell PowerEdge R240 Intel Xeon E-2224 3.50GHz 8GB DDR4 ECC NO HDD 250W
$285.97
867959-B21 HPE ProLiant DL360 G10 CTO Server W/ 2x 865414-B21 1x 840140-001
$245.00
Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD
$378.93
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$409.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2690 v3 | 64gb Ram | 2x 1600W
$524.99
Dell PowerEdge C4130 1U AI GPU Server | 2x E6-2699 v3 | 128gb RAM | 2x 1600W
$899.99
Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD
$99.99
Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00