Hi,
I have downloaded the driver for the prolink hurricane 8000 adsl modem and have installed it.
Ran the included script to start it up. Everything was going well until it tried to start the pppd. At that point, it says loading pppd daemon and then displayed garbage... Any suggestions what could be wrong?



Code:
>>> Inits Zyxel 630-11 & Asus AAM6000UG <<<

>>> Loading firmware...
Zyxel 630-11 & Asus AAM6000UG microcode upload program. 02/08/2004
Josep Comas <[email protected]>
Sundar <[email protected]>
Eduardo Espejo <[email protected]>

I found ADSL modem with VendorID = 06b9 & ProductID = a5a5
Loading and sending /usr/sbin/fw-usb.bin...
Firmware is sent!
Waiting ADSL line is up (until -1 seconds)...
>>> Loading driver...
FATAL: Module crc32 not found.
Launching driver in normal mode...

/usr/sbin/amload.sh successful
Setting PPP over ATM...
>>> Setting PPPoA <<<

>>> Loading ppp_generic...

>>> Loading pppoatm...

>>> Activating send/receive data...
Zxyel 630-11 & Asus AAM6000UG ioctl call. 24/9/2003
Josep Comas <[email protected]>
Sundar <[email protected]>
Eduardo Espejo <[email protected]>

I found ADSL modem with VendorID = 06b9 & ProductID = a5a5

>>> Loading pppd daemon...
~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~~ÿ}#À!}!}!} }4}"}&} } } } }%}&¤5¥@}'}"}(}"m})~