-
ACPI problems ...
Hello,
i have a sony vaio laptop and need to install ACPI to get the IRQ of my modem.
but i have some problems during the install procedure:
i have the knoppix version 2.4.19-xfs.
at first i downloaded the file
acpi-20020918-2.4.19.diff.gz
from the ACPI homepage.
then i copied the file into /usr/src
then i run:
gunzip acpi-20020726-2.4.18.diff.gz
cd linux
patch -p1 <../acpi-20020726-2.4.18.diff
After that i got the follwing message:
can't find file to patch at input line 206
Perhaps you used the wrong -p or --strip option?
The text leading up to this was:
--------------------------
|diff -Nura linux-2.4.19orig/MAINTAINERS linux-2.4.19acpi/MAINTAINERS
|--- linux-2.4.19orig/MAINTAINERS Sat Sep 21 20:10:11 2002
|+++ linux-2.4.19acpi/MAINTAINERS Sat Sep 21 01:00:37 2002
--------------------------
File to patch:
What can i do to solv this problem. how can i install ACPI? withut ACPI the IRQ of my modem is umknown.
Any other suggestion to get the IRQ?
(I am a linux newbie, so please dont write a too short answer)
Thanks!
-
ACPI patches
To install ACPI, you need to patch and compile your own kernel. To make matters a bit worse, the ACPI patch doesn't apply cleanly to a debian kernel. What I did is download the 2.4.20 kernel from www.kernel.org, apply the patch, and follow the instructions in the README file to make a new kernel
make xconfig
make dep; make clean; make bzImage; make modules
you then need to make install and make modules_install as root
then edit /etc/lilo.conf to add a new kernel.
-
Instead of patching and all that stuff, get the 2.4.22 kernel which has acpi included, and spare yourself the trouble of all those commands and do it the Debian way. Much cleaner and easier.
As su
cd /usr/src
tar -xpvjf linux-2.4.22.tar.bz2
mv linux linux-2.4.22
ln -s linux-2.4.22 linux
cd /usr/src/linux
make menuconfig
make-kpkg clean
make-kpkg -revision=custom1.0 kernel_image
dpkg -i ../kernel-image-2.4.22_custom.1.0_i386.deb
Put the proper entry into lilo.conf and you're done. Reboot.
-
Senior Member
registered user
Or better yet- (if you like things simple and easy) go to this how-to.
Similar Threads
-
By OP4Latino in forum Hardware & Booting
Replies: 0
Last Post: 05-27-2005, 06:27 AM
-
By Longfield in forum Laptops
Replies: 0
Last Post: 05-12-2005, 11:54 AM
-
By glimpse in forum Laptops
Replies: 0
Last Post: 03-28-2005, 11:30 AM
-
By dracula in forum Laptops
Replies: 6
Last Post: 04-16-2004, 11:06 PM
-
By hal2000 in forum General Support
Replies: 1
Last Post: 01-05-2003, 01:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Supermicro 4U 32x 3.5 Bays 4-Nodes | 8x E5-2660 v3 2.6Ghz | 64gb RAM | 9207-8i
$699.99

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$95.20

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD
$349.99

NEW Cisco UCSB-5108-AC2 Blade Server Chassis 8 Slot 6RU Chassis 4 X PSU - DW
$599.40

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99

Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99

DELL POWEREDGE FC640 Server FHH8V W/×2 Intel Xeon Gold 6142,0KHKN5. *READ⬇*
$130.00

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99

Nutanix Supermicro NXS2U2NL12G600 2x Node with Motherboards, Backplanes, & More
$450.00