This may seem like an obvious question, but have you tried the noapic cheat code?Originally Posted by reuben-karpovich
i have an intergraph td-225 with 196 mb dimm ram and a pentium II mmx (klamath) running at 255 mh. when i boot knoppix v9.3 it seems to hang . when i ran knoppix debug mode it showed me an apic error . i even tried running failsafe mode but it still hangs!!!!!!!!!!!!![]()
![]()
This may seem like an obvious question, but have you tried the noapic cheat code?Originally Posted by reuben-karpovich
---
Verifying of md5 checksum and burning a CD at slow speed are important.
yes i tried noapic and i tried acpi the next boot.i even tried failsafe.please help.![]()
![]()

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
HGST Ultrastar HUS726040AL5210 4TB 7200RPM SAS 12Gb/s Enterprise HDD
$41.00
Tested WD Ultrastar DC HC520 12TB 7.2K RPM SATA 6Gb/s 3.5" HDD HUH721212ALN600
$239.99
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Seagate Barracuda ST1000DM003 1 TB SATA III 3.5 in Desktop Hard Drive
$23.99
Seagate ST3000NM0005 HDD 3TB SATA 6Gb/s 7.2K 3.5" 512 b/s
$59.00
Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$339.00
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95