Results 1 to 2 of 2

Thread: APM power-off

  1. #1
    Junior Member registered user
    Join Date
    Oct 2005
    Location
    Lithuania
    Posts
    11

    APM power-off

    With Knoppix 4.02 my PC shutdown correctly with power-off,
    but with 5.01 APM not work. It looks that kernel didn't have apm module.

  2. #2
    Junior Member
    Join Date
    Aug 2006
    Location
    Seattle WA USA
    Posts
    1
    I have a Dell Latitude laptop with a Genuine Intel Mobile Pentium MMX Cpu running 233 MHz, 48 Mbytes of RAM. I have added to it a 3Com 3CCE589ET PCMCIA card.

    When I boot the machine using

    knoppix vga=0 acpi=off pnpbios=off noapic noapm nodma debug -b

    i get past the stage 1, 2, and 3 shells. Then I get to the root@console shell. I can mount the /proc file system. I can run lspci -v (output below). However, once I exit from this shell, the machine powers off.

    Now, in the process of writing this up, the machine did NOT power off. What I did was remove and insert the PCMCIA card and I also ran the lspci -v command - and of course, the machine waited a long time while I typed all oif the output of lspci -v by hand.

    So this is the worst kind of problem - it's intermittent.

    Any advice, please?


    Thank you


    Jeff Silverman
    -----------------------------------------

    lspcic -v shows

    0000:00:00.0 Host bridge: Intel Corporatoin 430TX - 82439TX MTXC (rev 01)
    Flags: bus master, medium devsel, latency 32
    0000:00:01.0 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ISA (rev 01)
    Flags: bus master, medium devsel, latency 0
    0000:00:01.1 IDE Interface: Intel Corporation 82371AB/EB/MB PIIX4 IDE (rev 01)(prog-if 80 [Master])
    Flags: bus master, medium devsel, latency 64
    I/O portds at 0860 [size=16]
    0000:00:01.2 USB Controller: Intel Corporation 82371AB/EB/MB PIIX4 USB (rev 01)(prog-if 00 [UHCI])
    Flags: bus master, medium devsel, latency 32 IRQ 11
    I/O portds at ece0 [size=32]
    0000:00:01.3 Bridge: Intel Corporation 82371AB/EB/MB PIIX4 ACPI (rev 01)
    Flags: bus master, medium devsel, IRQ 9
    0000:00:02.0 VGA compatible controller: Neomagic Corporation NM2160 [MagicGraph 128XD] (prog-if 00 [VGA])
    Subsystem: Dell MagicGraph 128XD
    Flags: bus master, medium devsel, latency 32, IRQ 11
    Memory at fd000000 (32 bit, prefetchable) [size=16M]
    Memory at fbe00000 (32 bit, non-prefetchable) [size=2M]
    Memory at fbd00000 (32 bit, non-prefetchable) [size=1M]
    0000:00:03.0 CardBus Bridge: Texas Instruments PCI1131 (rev 01)
    Subsystem: Dell: Unknown device 0075
    Flags: Bus Master, medium devsel, latency 32, IRQ 11
    Memory at 18000000 (32 bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=01, subordinate=04, sec-latency=176
    memory window 0: 10000000-11fff00 (prefetchable)
    memory window 1: 12000000-13fff00 (prefetchable)
    I/O window 0: 00001000-000010ff
    I/O window 0: 00001400-000014ff
    16-bit legacy interface ports at 0001
    0000:00:03.1 CardBus Bridge: Texas Instruments PCI1131 (rev 01)
    Subsystem: Dell: Unknown device 0075
    Flags: Bus Master, medium devsel, latency 32, IRQ 11
    Memory at 18000000 (32 bit, non-prefetchable) [size=4K]
    Bus: primary=00, secondary=05, subordinate=08, sec-latency=176
    memory window 0: 14000000-15fff00 (prefetchable)
    memory window 1: 16000000-17fff00 (prefetchable)
    I/O window 0: 00001800-000018ff
    I/O window 0: 00001c00-00001cff
    16-bit legacy interface ports at 0001

Similar Threads

  1. 9800 Pro, where's the power!?
    By Stealth870 in forum Hardware & Booting
    Replies: 2
    Last Post: 08-09-2004, 01:49 PM
  2. Is their a 'Live CD' for a G3 I-Mac (not a Power PC?
    By ronnie__g in forum General Support
    Replies: 6
    Last Post: 05-13-2004, 10:28 AM
  3. power outrage
    By spiwokv in forum General Support
    Replies: 1
    Last Post: 04-01-2004, 06:18 PM
  4. computer won't power off
    By dimkal in forum General Support
    Replies: 1
    Last Post: 01-07-2004, 12:04 AM
  5. Server down : Power cut
    By eadz in forum The Lounge
    Replies: 0
    Last Post: 05-31-2003, 02:30 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p picture

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p

$499.88



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD picture

Dell PowerEdge R730XD 28 Core Server 2X Xeon E5-2680 V4 H730 32GB RAM No HDD

$381.93



DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard) picture

DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard)

$399.95



Dell PowerEdge R240 Intel Xeon E-2144G 3.6GHz 16GB DDR4 ECC NO HDD 250W picture

Dell PowerEdge R240 Intel Xeon E-2144G 3.6GHz 16GB DDR4 ECC NO HDD 250W

$149.00



Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb picture

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb

$374.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO picture

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO

$308.00



Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server picture

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server

$349.99



Dell PowerEdge R740 8B SFF  CTO Barebone H330 QP 1GbE NDC 2x 750W PSU No CPU/Mem picture

Dell PowerEdge R740 8B SFF CTO Barebone H330 QP 1GbE NDC 2x 750W PSU No CPU/Mem

$395.00