Hi All,

Have a test box that I'm trying to recover. RHEL 4 with 4 SCSI drives.

/dev/sda1 is the /boot
/dev/sda2 is swap
/dev/sda3 is part of the software raid

The other drives contain swap and software raid partitions.

Software raid is /dev/md0

In my test I'm failing sda3 with mdadm, as if I have lost the whole drive and then booting in with Knoppix to save the day Next I rebuild the partitions, format the /dev/sda1 and copy the /boot info back to /dev/sda1 from backup copy I have on CD. Next I want to redo the MBR on /dev/sda, this is where I'm getting stuck on grub syntax.

I need to tell grub about the location of /boot which is /dev/sda1, not sure how this is done from a Knoppix boot.

Any Ideas Welcome!

Joe