I am somewhat pressed for time (about to board plane) will just point you to these links
http://www.knoppix.net/forum/viewtop...hlight=windows
http://www.knoppix.net/docs/index.php/FaqSambaQuick
![]()
Hi, my windows XP installation has crashed on a laptop. I'd like to copy all the information off the laptop on to my desktop prior to reinstalling the OS, unfortunately I can't even boot in to XP on the laptop.
I can see the partition and files when I boot using Knoppix, I can connect to the internet through the router (Linksys RT31P2), the desktop is connected to the same router. I can ping XP from Knoppix, I can not ping Knoppix from XP. The router is configured as a DHCP server.
Can I copy the entire contents of the laptop (now booted in Linux) to a folder on the desktop (Win XP)? Can I map the drive on the linux machine using XP?
How should I do this?
Thanks, John
I am somewhat pressed for time (about to board plane) will just point you to these links
http://www.knoppix.net/forum/viewtop...hlight=windows
http://www.knoppix.net/docs/index.php/FaqSambaQuick
Two comments
1) if the desktop is XP home (a fat32 file system,) you can do the transfer using knoppix CD's on both ends and avoid the samba configuration.
2) Google "forensic" type "copies". You can zip and send an entire partition over a network and unzip it into an empty partition on the desktop and then salvage, take it apart and|or recover with partition or file recovery tools at will.
The default file system for XP home is NTFS. While it will also support fat file systems, it is very rare to find someone who installed it this way, and it never comes pre-installed this way.Originally Posted by rcook
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Thank you for all the replies.
I have managed to start the copy process. I did the following:
- turn off windows firewall
- allow write access to 'everyone' to a specific share on the windows machine
- used KNetAttach under Internet to map the shared folder
- then just used Knoppix to copy the files, it is still copying but is working, transfer rate is OK but not great. It sat idle for quite a while asking if I wanted to skip a tmp file that windows had left open

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$140.00
Cisco UCS 5108 Blade Server Chassis Enclosure N20-C6508 4x PSU 8x Fans 2x Fabric
$174.99
Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99
NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97
Supermicro 4U 32x 3.5 Bays 4-Nodes | 8x E5-2660 v3 2.6Ghz | 64gb RAM | 9207-8i
$699.99
Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99
Dell PowerEdge M640 Blade Server 2x Gold 6126 12C 32GB 2x 480GB SSD H330
$1759.00
Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Empty Chassis XJ6VP
$149.99
NEW Cisco UCSB-5108-AC2 Blade Server Chassis 8 Slot 6RU Chassis 4 X PSU - DW
$599.40
Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 256GB DDR3 RAM NO HDD
$349.99