-
problems with K3B / cdrecord on KNX 5.0.1 (cd) HD-installed
Hi Folks!
Anyone having similar problems?
I have a SCSI CD-writer (TEAC) on an Adaptec controller. This one always done its jop perfectly. But now, having the new Knoppix on my computer, it does not anymore. K3B says that there's no CD-R in the writer (but there is!), and when i klick on "erzwingen", i get an error 255 from cdrecord. Hm. I did let K3B set permissions on the first start. I tried differend CD-R's, and tested it in two different PCs (with the same cd-writer&controller) - same results. But the Nero Burning Rom software under WinXP does work! So there's no hardware fault, and my CD-Rs are ok.
Greetings
Additional info: The "eject" and "load" buttons in the there-is-no-cdr-in-the-writer-dialog-window do not work (nothing happens when i klick on them), and when i insert an empty cd-r the info in the window switches from "no media" to "cd-rom". The same window shows the correct drive name and device /dev/scd0).
-
...i just did some testing again:
Booting from Knoppix 5.0.1-CD CD-writing DOES NOT work, as described above.
Booting from older Knoppix 4.0.2-CD there is no problem in CD-writing, on the same hardware! So there is something wrong with K3b/cdrecord in the Knoppix 5!
...still nobody else has problems with CD-writing??
-
Senior Member
registered user
Sorry, I tried to help. I have been trying various K3B scenarios to try to get the same error message as you but could not do it -- k3b worked every time.
Can you confirm if cdrecord works on the command line? Then at least we know it is a problem with k3b and not cdrecord.
Similar Threads
-
By klerg in forum Hdd Install / Debian / Apt
Replies: 7
Last Post: 04-10-2007, 09:36 AM
-
By drippyhippie in forum Hdd Install / Debian / Apt
Replies: 9
Last Post: 02-24-2005, 05:57 AM
-
By keyvisuals in forum Hdd Install / Debian / Apt
Replies: 4
Last Post: 05-17-2004, 04:38 PM
-
By Megagun in forum General Support
Replies: 1
Last Post: 09-13-2003, 01:09 PM
-
By rickenbacherus in forum The Lounge
Replies: 5
Last Post: 05-25-2003, 09:14 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU
$11.00

Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS
$239.99

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA
$350.48

Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS
$179.98

Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS
$84.49

Genuine Intel Xeon W-2145 3.70Ghz 8 Cores LGA2066 CPU SR3LQ Tested USA SELLER
$94.94

DELL Precision 5820 Workstation Xeon W-2123 3.6ghz/NO RAM/NO SSD/P400 Vid
$139.99

Intel Xeon Phi 5110P 60-Core 1.053GHz Coprocessor
$50.00

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00