-
Thanks for all your help but i re-ran the netcard config as above but with no better results.
Afterwards ifconfig gave the following;
Code:
eth0 Link encap:UNSPEC HWaddr 00-11-06-00-00-00-38-1A-00-00-00-00-00-00-00-00
inet addr:192.168.1.2 Bcast:192.168.1.255 Mask:255.255.255.0
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
TX packets:30 errors:2 dropped:2 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:0 (0.0 b) TX bytes:1080 (1.0 KiB)
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:48 errors:0 dropped:0 overruns:0 frame:0
TX packets:48 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:3672 (3.5 KiB) TX bytes:3672 (3.5 KiB)
i then tried to ping to the internet and this gave the following;
Code:
PING 216.32.81.146 (216.32.81.146) 56(84) bytes of data.
From 192.168.1.2 icmp_seq=1 Destination Host Unreachable
From 192.168.1.2 icmp_seq=2 Destination Host Unreachable
From 192.168.1.2 icmp_seq=3 Destination Host Unreachable
From 192.168.1.2 icmp_seq=4 Destination Host Unreachable
From 192.168.1.2 icmp_seq=5 Destination Host Unreachable
From 192.168.1.2 icmp_seq=6 Destination Host Unreachable
From 192.168.1.2 icmp_seq=7 Destination Host Unreachable
From 192.168.1.2 icmp_seq=8 Destination Host Unreachable
From 192.168.1.2 icmp_seq=9 Destination Host Unreachable
--- 216.32.81.146 ping statistics ---
12 packets transmitted, 0 received, +9 errors, 100% packet loss, time 11076ms
, pipe 3
also i couldnt get access to the router via Konquerer using http://192.168.1.1
i've had a look while running xp and ipconfig gives;
Code:
Windows IP Configuration
Ethernet adapter Local Area Connection:
Connection-specific DNS Suffix . : home
IP Address. . . . . . . . . . . . : 192.168.1.2
Subnet Mask . . . . . . . . . . . : 255.255.255.0
Default Gateway . . . . . . . . . : 192.168.1.1
Other info i've got from the router is :
Code:
LAN IP Address 192.168.1.1
Default Gateway 217.47.67.142
Primary DNS Server 194.74.65.69
Secondary DNS Server 62.6.40.178
Firmware Version 3.01z
Boot Loader Version 1.0.37-21.6.11
ADSL Driver Version A2pB018c1.d16d
Ethernet MAC Address 00:16:E3:64:79:12
i also tried putting this gateway ip when running knoppix with no better results.
I'm sure i should be able to get to the internet while running knoppix, as all the lights on the router indicates that the connection is on.
If theres any other info i can supply to help solve my problems please let me know, otherwise i'm a bit stuck!
Thanks in advance.
Similar Threads
-
By ladyarcher44 in forum Networking
Replies: 0
Last Post: 12-21-2006, 10:56 PM
-
By Jorge Martínez in forum Networking
Replies: 1
Last Post: 07-07-2006, 11:27 PM
-
By compgeek in forum Networking
Replies: 10
Last Post: 01-06-2006, 10:52 PM
-
By Josh in forum Networking
Replies: 5
Last Post: 02-24-2005, 05:17 AM
-
By Sance in forum General Support
Replies: 2
Last Post: 12-06-2004, 10:27 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

VTG Atari 400 Home Computer System ** Sold "AS-IS" for Parts or Repair
$88.75

Atari 130 XE/Atari 1050 Bundle W/ Cords And Extras (Powered On)
$300.00

DEFECTIVE Atari 810 Vintage Computer Disk Drive powers on Unit Only Boo G3D
$49.29

UNOCART-2600 SD card Multi Rom Cartridge for ATARI 2600 with CASE
$34.25

Fujinet 1.7.1 Atari 400 800 800XL 130XE 65XE XEGS Assembled, Tested, Working
$99.99

SDrive Max Floppy Drive Emulator Atari 8-Bit 400/800/XL/XE Firmware 1.5 USB C R2
$70.00

Atari XE 130XE Computer NTSC with Power Supply Powers On Untested
$159.95

INFO/soft Character Generator Manual for Atari 3000/5000/7000 NTSC
$40.00

Atari 800 8-bit Computer System Fully Tested Great Condition 48k READ
$350.00

ATARI HDD Drive ACSI Emulator 520-1040ST/STF/STFM, STE, Mega STE, TT030 acsi2stm
$48.95