Results 1 to 3 of 3

Thread: card reader problems

  1. #1
    Member registered user
    Join Date
    Sep 2006
    Posts
    33

    card reader problems

    RE_SUMBITTED i wrongly submitted to networking; unable to delete from there. Sorry, very sorry

    Unable to get hama usb 2.0 card reader 9in1 (with Sony memory stick) detected on knoppix 5.0.1 launched from CD (pc on debian etch 32bit). This is a trial before going to buy expensive 9GB card reader for my data and special programs for using knoppix from CD on computers (mostly Mac) I'll find on French colonies.

    Deabian etch running WITHOUT CARD READER IN:
    francesco@debian:~$ lspci -v
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
    Flags: bus master, medium devsel, latency 32
    Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
    Capabilities: <access denied>

    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    Memory behind bridge: cde00000-cfefffff
    Prefetchable memory behind bridge: bdc00000-cdcfffff

    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
    Flags: bus master, medium devsel, latency 0

    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
    Flags: medium devsel
    I/O ports at 0c00 [size=32]

    00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) (prog-if 10 [OHCI])
    Subsystem: Elitegroup Computer Systems K7S5A motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]

    00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) (prog-if 10 [OHCI])
    Subsystem: Elitegroup Computer Systems K7S5A motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]

    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
    Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
    Flags: bus master, fast devsel, latency 128
    I/O ports at ff00 [size=16]

    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
    Subsystem: Elitegroup Computer Systems Unknown device 0a14
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at d800 [size=256]
    I/O ports at d400 [size=64]
    Capabilities: <access denied>

    00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
    Subsystem: Adaptec AHA-2904/Integrated AIC-7850
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at dc00 [disabled] [size=256]
    Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:0d.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 40)
    Subsystem: Unknown device 4554:434e
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at d000 [size=256]
    Memory at cfffcf00 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at cff80000 [disabled] [size=256K]
    Capabilities: <access denied>

    00:11.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffa000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:11.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffb000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Unknown device 1838:1074
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffce00 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
    Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 5
    Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (32-bit, prefetchable) [size=128M]
    [virtual] Expansion ROM at cfef0000 [disabled] [size=64K]
    Capabilities: <access denied>

    francesco@debian:~$

    DEBIAN RUNNING WITH CARD READER MOUNTED (AND PROPERLY WORKING)
    debian:/home/francesco# mount -t vfat -o user,rw,exec,umask=000 /dev/sdb1 /mnt/flash
    debian:/home/francesco# exit
    exit
    francesco@debian:~$ lspci -v
    00:00.0 Host bridge: Silicon Integrated Systems [SiS] 735 Host (rev 01)
    Flags: bus master, medium devsel, latency 32
    Memory at d0000000 (32-bit, non-prefetchable) [size=64M]
    Capabilities: <access denied>

    00:01.0 PCI bridge: Silicon Integrated Systems [SiS] Virtual PCI-to-PCI bridge (AGP) (prog-if 00 [Normal decode])
    Flags: bus master, fast devsel, latency 64
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=64
    Memory behind bridge: cde00000-cfefffff
    Prefetchable memory behind bridge: bdc00000-cdcfffff

    00:02.0 ISA bridge: Silicon Integrated Systems [SiS] SiS85C503/5513 (LPC Bridge)
    Flags: bus master, medium devsel, latency 0

    00:02.1 SMBus: Silicon Integrated Systems [SiS] SiS961/2 SMBus Controller
    Flags: medium devsel
    I/O ports at 0c00 [size=32]

    00:02.2 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) (prog-if 10 [OHCI])
    Subsystem: Elitegroup Computer Systems K7S5A motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffd000 (32-bit, non-prefetchable) [size=4K]

    00:02.3 USB Controller: Silicon Integrated Systems [SiS] USB 1.0 Controller (rev 07) (prog-if 10 [OHCI])
    Subsystem: Elitegroup Computer Systems K7S5A motherboard
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffe000 (32-bit, non-prefetchable) [size=4K]

    00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev d0) (prog-if 80 [Master])
    Subsystem: Silicon Integrated Systems [SiS] SiS5513 EIDE Controller (A,B step)
    Flags: bus master, fast devsel, latency 128
    I/O ports at ff00 [size=16]

    00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
    Subsystem: Elitegroup Computer Systems Unknown device 0a14
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at d800 [size=256]
    I/O ports at d400 [size=64]
    Capabilities: <access denied>

    00:0b.0 SCSI storage controller: Adaptec AHA-7850 (rev 03)
    Subsystem: Adaptec AHA-2904/Integrated AIC-7850
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at dc00 [disabled] [size=256]
    Memory at cffff000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:0d.0 Ethernet controller: Davicom Semiconductor, Inc. 21x4x DEC-Tulip compatible 10/100 Ethernet (rev 40)
    Subsystem: Unknown device 4554:434e
    Flags: bus master, medium devsel, latency 64, IRQ 11
    I/O ports at d000 [size=256]
    Memory at cfffcf00 (32-bit, non-prefetchable) [size=256]
    Expansion ROM at cff80000 [disabled] [size=256K]
    Capabilities: <access denied>

    00:11.0 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffa000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:11.1 USB Controller: NEC Corporation USB (rev 43) (prog-if 10 [OHCI])
    Subsystem: NEC Corporation Hama USB 2.0 CardBus
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffb000 (32-bit, non-prefetchable) [size=4K]
    Capabilities: <access denied>

    00:11.2 USB Controller: NEC Corporation USB 2.0 (rev 04) (prog-if 20 [EHCI])
    Subsystem: Unknown device 1838:1074
    Flags: bus master, medium devsel, latency 64, IRQ 11
    Memory at cfffce00 (32-bit, non-prefetchable) [size=256]
    Capabilities: <access denied>

    01:00.0 VGA compatible controller: nVidia Corporation NV11DDR [GeForce2 MX 100 DDR/200 DDR] (rev b2) (prog-if 00 [VGA])
    Flags: bus master, 66MHz, medium devsel, latency 248, IRQ 5
    Memory at ce000000 (32-bit, non-prefetchable) [size=16M]
    Memory at c0000000 (32-bit, prefetchable) [size=128M]
    [virtual] Expansion ROM at cfef0000 [disabled] [size=64K]
    Capabilities: <access denied>

    francesco@debian:~$

    ON KNOPPIX, card reader not detected on:
    launching knoppix with card reader in
    hot plugging card reader
    cat /proc/partitions
    dmesg | grep sd
    fdisk -l



    Thanks for help. Should also <$ lspci -v> be needed from knoppix running, please advise me. However, knoppix detects all HD, including external scsi peripherals (HD, CD, scanner, all working ok). What does not work is networking (ADSL), not needed for my travel; also Deskjet 5740 not working: CUPS, answers that filter Foomatic + hpijs does not exist or user without permission. May be because i hate USB (never had problems with scsi from laptops to mainframes)

    francesco pietra

  2. #2
    Senior Member registered user
    Join Date
    Jul 2006
    Posts
    117
    Do you see anything with lsusb or lsusb -v ?

  3. #3
    Member registered user
    Join Date
    Sep 2006
    Posts
    33
    Much closer now. The card is now detected identically (except for bus and device nr) on debian etch and knoppix

    root@knoppix# lsub -v
    Bus 001 Device 002: ID 0dda:2005 Integrated Circuit Solution, Inc.
    Device Descriptor:
    bLength 18
    bDescriptorType 1
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    idVendor 0x0dda Integrated Circuit Solution, Inc.
    idProduct 0x2005
    bcdDevice 1.6b
    iManufacturer 1 ICSI
    iProduct 2 USB2.0 Card Reader
    iSerial 3 0000001
    bNumConfigurations 1
    Configuration Descriptor:
    bLength 9
    bDescriptorType 2
    wTotalLength 32
    bNumInterfaces 1
    bConfigurationValue 1
    iConfiguration 4 Storage
    bmAttributes 0x80
    (Bus Powered)
    MaxPower 500mA
    Interface Descriptor:
    bLength 9
    bDescriptorType 4
    bInterfaceNumber 0
    bAlternateSetting 0
    bNumEndpoints 2
    bInterfaceClass 8 Mass Storage
    bInterfaceSubClass 6 SCSI
    bInterfaceProtocol 80 Bulk (Zip)
    iInterface 5 Bulk
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x82 EP 2 IN
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Endpoint Descriptor:
    bLength 7
    bDescriptorType 5
    bEndpointAddress 0x01 EP 1 OUT
    bmAttributes 2
    Transfer Type Bulk
    Synch Type None
    Usage Type Data
    wMaxPacketSize 0x0200 1x 512 bytes
    bInterval 0
    Device Qualifier (for other device speed):
    bLength 10
    bDescriptorType 6
    bcdUSB 2.00
    bDeviceClass 0 (Defined at Interface level)
    bDeviceSubClass 0
    bDeviceProtocol 0
    bMaxPacketSize0 64
    bNumConfigurations 1
    Device Status: 0x0000
    (Bus Powered)
    __________
    root@knoppix# dmesg | grep sd
    sd 1:0:0:0: Attached scsi removable disk sda
    _______________--
    It is not seen on either
    cat /proc/partitions
    (where, besides the hda and hdb, coop0 is listed)
    or
    fdisk -l

    I tried to mount card reader as if it were on debian:
    #mkdir /mnt/flash
    #mount -t vfat -o user,rew,exec,umask=000 /dev/sda /mnt/flash
    mount: no medium found

    #mount -t vfat -o user,rew,exec,umask=000 /dev/sda1 /mnt/flash
    device /dev/sda1 does not exist
    _____________________

    Bus 004 Device 002 HP Deskjet 5700
    is detected
    _____________
    Thanks a lot for advice. It seems that it is my fault.

    francesco

Similar Threads

  1. USB Card reader
    By lotech in forum General Support
    Replies: 0
    Last Post: 05-23-2005, 03:27 AM
  2. Multi card reader
    By richb in forum Hardware & Booting
    Replies: 1
    Last Post: 10-18-2004, 11:44 PM
  3. 8in1-Card-Reader with Knoppix3.3 ?
    By Tam in forum Hardware & Booting
    Replies: 1
    Last Post: 04-09-2004, 03:24 AM
  4. CF Card Reader Problem, 802.11b WEP keys, etc
    By DukeLeto in forum Hardware & Booting
    Replies: 3
    Last Post: 06-02-2003, 07:00 PM
  5. usb keyboard sandisk usb cf card reader
    By anushatech in forum Hardware & Booting
    Replies: 5
    Last Post: 03-20-2003, 02:10 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NEW JUNIPER QFX5120-48Y-AFO-T 48x 10/25GbE SFP28 8x 40/100GbE Switch Dual AC PS picture

NEW JUNIPER QFX5120-48Y-AFO-T 48x 10/25GbE SFP28 8x 40/100GbE Switch Dual AC PS

$12750.00



Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P picture

Juniper EX2300 12-Port Gigabit PoE+ Managed Network Switch P/N: EX2300-C-12P

$149.99



Juniper Network QFX5100-48S-AFO 48x SFP/SFP+ 6x 40GbE QSFP+ Switch w/ Dual power picture

Juniper Network QFX5100-48S-AFO 48x SFP/SFP+ 6x 40GbE QSFP+ Switch w/ Dual power

$253.30



Juniper EX4300-24P 24 Port Gigabit PoE+ Switch. picture

Juniper EX4300-24P 24 Port Gigabit PoE+ Switch.

$114.35



Juniper EX4100-F-12P Switch 12x 1GbE PoE  2x 10GbE Uplinks 4x 10GbE Stack Ports picture

Juniper EX4100-F-12P Switch 12x 1GbE PoE 2x 10GbE Uplinks 4x 10GbE Stack Ports

$900.00



Juniper EX3300-48P 48-Port 10/100/1000 BaseT 48-Ports PoE+ Switch picture

Juniper EX3300-48P 48-Port 10/100/1000 BaseT 48-Ports PoE+ Switch

$150.00



Juniper EX2300-C-12P 12 Port Gigabit PoE+ 2x10G SFP+ Managed Compact  Switch picture

Juniper EX2300-C-12P 12 Port Gigabit PoE+ 2x10G SFP+ Managed Compact Switch

$179.99



Juniper EX3400-48T-AFI Ethernet Network Switch 48x1GbE 4x10GbE SFP+ 2x40GbE QSFP picture

Juniper EX3400-48T-AFI Ethernet Network Switch 48x1GbE 4x10GbE SFP+ 2x40GbE QSFP

$139.00



Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch picture

Juniper EX3400-24P 24-Port PoE+ GbE + 4-Port 1/10Gb SFP Switch

$245.00



Juniper QFX5100-48T-AFI 48-port 1G/10G RJ-45 ports 6 QSFP ports BRAND NEW SEALED picture

Juniper QFX5100-48T-AFI 48-port 1G/10G RJ-45 ports 6 QSFP ports BRAND NEW SEALED

$999.97