* just boot with knoppix
* double click the HDD (hda)icon or partion where nfts xp is installed to mount it!!
* you see a little geen triangle flashing .
* and use KB3 cd rewriter soft ware to copy the mydocument etc to a CD_R this saves you dismatelling the HDD and connecting it to another pc with XP on it etc .
if you got a laptop and only one combi DVD/Rewriter drive you boot knoppix cd from there and it gets locked so you cannot use it when you get to desk top because knoppix only runs from cd-drive not HDD so you need to use Disgo drive which is like a key ring which you stick into USB drive comes in 128 mb ,256,512mb, when you are in desk top if you insert Disgo into the USB 1.1 it picks it up as SDA1 on desk top you need to right click on icon and from the contex menu choose mount ,and the right click on icon and choose chenge read write mode after that you can copy and paste into it.To beon safe side I put the Disgo into the usb first then put Knoppix in cd-rom drive then turn Laptop on.

1. Put USB device Disgo into 1.1 USB port.
2. Put knoppix cd in cdrom/dvd rom Drive.
3. turn computer on.
4. once you are on desk top Disgo shows as sda1.
5. either double click on it to mount it or right click on it and choose mount.
6. you get a flashing triangle in the corner of icon indicating it is mounted.
7. again right click on the icon and choose change read write Mode.
8. after this you can copy and past into it .

Regards Ben