Results 1 to 3 of 3

Thread: Sound Problems need help please (audio)

  1. #1
    Junior Member
    Join Date
    Nov 2006
    Posts
    3

    Sound Problems need help please (audio)

    I have both the latest Knoppix live DvD and the Games Knoppix 4.0.2 DvD. Both boot and run fine and all hardware seems to be detected ok for the most part.

    In the standard DvD I have no sound (dell e510 integrated sigmatel audio) until I go into kmix and turn on surround(click the little green circle). Then sound works find in everything. (Also the standard distro runs the vesa video and no hardware 3d accel.)

    In Games Knoppix kmix has no option to turn on surround, neither does the only other included mixer (aumix iirc). So I have no clue how to get the sound activated. (Games Knoppix auto configures my 3d acceleration so I'd really like to stick with it, plus I like the preinstalled packages/games.)

    I've tried all the outputs on my pc to see if it was just sending it to the wrong jack, I even tried input and mic jacks but to no avail. The system thinks it's playing the sound, the vizualization shows the ups and downs, but it seems to be sending the actual output signal to the wrong place, or nowhere.

    Since I'm running a live DvD on a box with an ntfs drive and no place to store a persistent partition I can't really get into installing the video drivers and games and stuff on the standard dvd, especially since I'm such a noob I can barely navigate apt-get and remastering isn't a practical option for me.

    So I figured I could just install a version of kmix that has the option to turn on surround but I've had no luck. I figured I could just install it to the ramdisk and maybe then save it to a floppy. I used kpackage and apt-get but I always get dependency errors or other problems. And being a noob I have no idea what I'm doing wrong. (I also tried re-running alsaconf and it re-set up the card correctly but still no sound. If I do the same in the standard knoppix it works like normal ie: after turning on surround in kmix but not before.)

    It's so frustrating since I see that my card is all set up right but I just have no idea how to get it to send the output to the right place since the version of kmix on games knoppix doesn't have the option to enable surround.

    If anyone could help me with this I'd really appreciate it.

  2. #2
    Senior Member registered user
    Join Date
    Oct 2003
    Location
    N42.41 W73 and change
    Posts
    401
    I can suggest a workaround that may or may not work. With your games knoppix (you're running from cd, not hard disk, right?) , open a root shell and type apt-get update. When that finishes type: apt-get install kmix, to install a newer version of kmix.

    Restart sound services and see what happens.

    YMMV

  3. #3
    Junior Member
    Join Date
    Nov 2006
    Posts
    3
    Thanks Rusty for the reply, Yes I am running from the cd (dvd actually).

    Unfortunately though I did try that before I posted and I had no luck due to dependency errors. I'm about to reboot into games knoppix and try again though.

Similar Threads

  1. CD V4.0.2 Odd audio or sound problem regarding speech
    By dennisdjensen in forum Hardware & Booting
    Replies: 2
    Last Post: 10-27-2005, 12:29 PM
  2. Sound/Audio problems on a hard disk install.
    By lothario in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 08-20-2004, 08:53 PM
  3. Audio CD's problems. ( cdparanoia)
    By DimGR in forum Hardware & Booting
    Replies: 3
    Last Post: 06-02-2004, 09:03 PM
  4. SiS7012 PCI audio problems
    By mandre in forum Hardware & Booting
    Replies: 1
    Last Post: 04-11-2003, 05:33 PM
  5. nForce Integrated Audio and 6 channel sound
    By blubu in forum Hardware & Booting
    Replies: 0
    Last Post: 03-26-2003, 12:29 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco C9200-48P-A Catalyst 48-Port PoE+ Switch picture

Cisco C9200-48P-A Catalyst 48-Port PoE+ Switch

$749.00



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99



Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New picture

Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New

$101.99



Cisco Catalyst C9130AXI-B Wi-Fi 6 Access Points - Tested & Working (AP Only) picture

Cisco Catalyst C9130AXI-B Wi-Fi 6 Access Points - Tested & Working (AP Only)

$89.99



Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture

Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch

$439.00



The Cisco Catalyst C9300X-NM-2C is a professional networking adapter designed fo picture

The Cisco Catalyst C9300X-NM-2C is a professional networking adapter designed fo

$750.00



Cisco Catalyst WS-C2960X-48FPD-L 48-Port Gigabit Managed PoE+ Ethernet Switch picture

Cisco Catalyst WS-C2960X-48FPD-L 48-Port Gigabit Managed PoE+ Ethernet Switch

$69.99



Cisco | N3K-C3232C | 32-Port 100G QSFP Network Switch  W/ 2x PSU, 2x Power Cords picture

Cisco | N3K-C3232C | 32-Port 100G QSFP Network Switch W/ 2x PSU, 2x Power Cords

$205.00



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99



CISCO INDUSTRIAL SWITCH IE-3100-8T2C-E New  picture

CISCO INDUSTRIAL SWITCH IE-3100-8T2C-E New

$1049.00