Results 1 to 5 of 5

Thread: Unionfs for kernel 2.6.19

  1. #1
    Junior Member
    Join Date
    Dec 2006
    Posts
    3

    Unionfs for kernel 2.6.19

    Does any body know where I can find unionfs package for kernel 2.6.19? The following site shows that the CVS version supports 2.6.19-rc.

    http://www.fsl.cs.sunysb.edu/project-unionfs.html

    I have downloaded the CVS package
    ftp://ftp.fsl.cs.sunysb.edu/pub/unio...cvssnap.tar.gz
    but does not seem to be the right one.

  2. #2
    Senior Member registered user
    Join Date
    Apr 2004
    Location
    Finland
    Posts
    272

    Re: Unionfs for kernel 2.6.19

    Quote Originally Posted by linux win
    Does any body know where I can find unionfs package for kernel 2.6.19?

    I haven't succeeded, too

    But it CAN be compiled and e.g. beyond1 patchset for 2.6.19 http://iphitus.loudas.com/index.html includes working unionfs. I have also compiled new kernel myself and if you are satisfied with my configuration, you can download my kernel WITH unionfs module included and some extra modules outside the kernel tree from http://linux.ilmainen.net/musix/linu...9-beyond1-SMP/


    -tapsa-

  3. #3
    Junior Member
    Join Date
    Dec 2006
    Posts
    3
    Thanks. I got it done using the patch in the site you refered me to:

    http://iphitus.loudas.com/beyond/2.6...19-beyond1.bz2

    I patched a fresh copy of the kernel. Then, I copied the /fs/unionfs directory to my kernel and added the following to /fs/Kconfig file starting at line 1625:

    Code:
    config UNION_FS
    	tristate "Union fs support"
    	depends on EXPERIMENTAL
    	help
    	  Unionfs is a stackable unification file system, which can
    	  appear to merge the contents of several directories (branches),
    	  while keeping their physical content separate.
    
    	  see <http://www.fsl.cs.sunysb.edu/project-unionfs.html> for details
    and added the following line to the end of /fs/Makefile

    Code:
    obj-$(CONFIG_UNION_FS)          += unionfs/
    Then I run made oldconfig followed by kpkg and got a working kernel 2.6.19 with unionfs.

    Thanks again for quick help.

  4. #4
    Senior Member registered user
    Join Date
    Apr 2004
    Location
    Finland
    Posts
    272
    Quote Originally Posted by linux win
    I patched a fresh copy of the kernel. Then, I copied the /fs/unionfs directory to my kernel and added the following to /fs/Kconfig file starting at line 1625:

    Code:
    config UNION_FS
    	tristate "Union fs support"
    	depends on EXPERIMENTAL
    	help
    	  Unionfs is a stackable unification file system, which can
    	  appear to merge the contents of several directories (branches),
    	  while keeping their physical content separate.
    
    	  see <http://www.fsl.cs.sunysb.edu/project-unionfs.html> for details
    and added the following line to the end of /fs/Makefile

    Code:
    obj-$(CONFIG_UNION_FS)          += unionfs/
    Then I run made oldconfig followed by kpkg and got a working kernel 2.6.19 with unionfs.
    Thanks for you instructions. But could you help me to build a realtime preemption patched kernel with unionfs.

    I have applied -rt15 patch from http://people.redhat.com/mingo/realtime-preempt/ and added unionfs as you did. Somehow it seems to be difficult to apply other pathes with realtime preemption patch. This is the error message I got:
    Code:
    Building modules, stage 2.
     MODPOST 1571 modules
    WARNING: "there_is_no_init_MUTEX_LOCKED_for_RT_semaphores" [fs/unionfs/unionfs.ko] undefined!
    make[2]: *** [__modpost] Virhe 1
    make[1]: *** [modules] Virhe 2
    make[1]: Poistutaan hakemistosta "/usr/src/linux-2.6.19"
    make: *** [debian/stamp-build-kernel] Virhe 2
    -tapsa-

  5. #5
    Junior Member
    Join Date
    Dec 2006
    Posts
    3
    I tried it and got the same error message plus two other error messages. I am trying to produce a stand alone package out of the kernel unionfs package. If I succeed, I will upload it and give you the link.

    Edit:

    I am sorry, I did not succeed.

Similar Threads

  1. does knoppix, use aufs? or unionfs? ...still says /UNIONFS..
    By starlyptErin_. in forum General Support
    Replies: 0
    Last Post: 08-22-2009, 10:55 PM
  2. Root file system links to UNIONFS (e.g. bin -> /UNIONFS/b
    By Jim Tonic in forum Customising & Remastering
    Replies: 1
    Last Post: 05-24-2006, 04:14 AM
  3. Successfully remastered 3.9 with rebuilt kernel and unionfs
    By Pallbearer in forum Customising & Remastering
    Replies: 1
    Last Post: 08-06-2005, 04:53 PM
  4. UnionFS
    By lilsirecho in forum The Lounge
    Replies: 7
    Last Post: 04-22-2005, 06:42 PM
  5. kde and unionfs
    By ethrandil in forum General Support
    Replies: 1
    Last Post: 03-03-2005, 12:00 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00



Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD picture

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD

$119.99



Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR picture

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR

$140.00



NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER picture

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER

$1499.97



Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays picture

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays

$799.99



Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB

$149.99



Dell PowerEdge VRTX 2.5

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)

$1599.99



Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R picture

Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R

$399.00



Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working picture

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working

$149.99



Dell Poweredge VRTX 25Bay 2.5

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS

$578.08