Results 1 to 5 of 5

Thread: knoppix dvd 5.0.1 boot error

  1. #1
    Junior Member
    Join Date
    Dec 2006
    Posts
    4

    knoppix dvd 5.0.1 boot error

    hello,
    while trying to boot knoppix dvd 5.01 I got the following error early during boot up:
    "cannot unite read-only media and initial ramdisk"

    I checked the md5sum which is ok.
    I tried it on a Intel and a AMD box (both around 2.2GHz, 750MB RAM) getting the same error message.
    Knoppix dvd 4 worked on both boxes just fine.
    Searching in this forum I only found this error mentioned in the years 2004 and earlier for Knoppix3 and earlier saying things about patches. I don't think this still applies now.
    Does anyone know how solve this problem?

  2. #2
    Junior Member
    Join Date
    Dec 2006
    Posts
    4

    solved

    I was able (forced to solve the problem myself.
    It turned out that the DVD was not fully ok.
    I reburnt one of the same make and same speed and then booting worked just fine.
    It seems that the compressed file system of knoppix is very sensitive to the smallest discrepancies.
    It would be wise not only to check the integrity of the initially downloaded iso-file as I did but also the actual burned DVD. However I am not sure how to check the md5sum for a DVD. Maybe someone has a hint on this.
    Thanks.

  3. #3
    Junior Member
    Join Date
    Dec 2006
    Posts
    4

    check the Knoppix DVD

    When booting from the koppix dvd you can find in the grub menu under F2 a special cheat code for testing the knoppix dvd.
    This feature is really recommended after burning since even small errors have drastic effects.

  4. #4
    Junior Member
    Join Date
    Dec 2006
    Posts
    4

    how to verify a burnt cd / dvd with its original iso file

    there is another more general way to verify a cd / dvd with its original iso-file after burning:
    create md5sum of the iso-file:

    md5sum ORIGINAL-ISO-FILE.iso

    read cd/dvd from eg. /dev/hdc and take only the initial portion of the same length as the iso-file leaving away the lead-out at the end and then send this into md5sum:

    dd if=/dev/hdc | head --bytes $(stat --format=%s ORIGINAL-ISO-FILE.iso) | md5sum

    Now compare the two md5sums. If they are the same you have a good burn.
    I was surprised how many bad burns I produced without even knowing. Just a fingerprint can ruine your burning.
    In case of music or video data you will not recognise the flaws. However, the compressed file systems like those of Knoppix will not forgive the slightest flaw.

  5. #5
    Junior Member
    Join Date
    Dec 2006
    Posts
    3
    you pretty much took care of everything yourself here. i'm sure the info will be valuable to whoever will later need it.

Similar Threads

  1. Knoppix error @ boot
    By Ecstasy in forum General Support
    Replies: 3
    Last Post: 05-13-2006, 08:01 PM
  2. error while boot in Knoppix 3.3
    By yummyyummy in forum General Support
    Replies: 0
    Last Post: 06-21-2004, 12:47 AM
  3. Knoppix don't boot. Error: modprobe:....
    By assem046 in forum General Support
    Replies: 0
    Last Post: 11-26-2003, 01:53 PM
  4. Remastering Error: Can't Find Boot Image KNOPPIX/boot.img
    By mswarbrick in forum Customising & Remastering
    Replies: 6
    Last Post: 04-18-2003, 12:30 AM
  5. Knoppix boot from CD gives error and hangs...
    By StuPC in forum General Support
    Replies: 6
    Last Post: 01-13-2003, 10:37 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch picture

NETGEAR GS308EP Essential Series 8-Port Gigabit PoE+ Unmanaged Switch

$39.99



10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W picture

10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W

$39.99



NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (Gs305) - Desktop Quiet Fanless picture

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (Gs305) - Desktop Quiet Fanless

$22.00



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99



TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch picture

TP-Link TL-SG105 5-Port Gigabit Ethernet Unmanaged Metal Desktop Network Switch

$19.99



TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597 picture

TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597

$36.98



TP-Link Omada SG3428 24-Port Gigabit L2+ Managed Switch 4x SFP w/ Ears picture

TP-Link Omada SG3428 24-Port Gigabit L2+ Managed Switch 4x SFP w/ Ears

$104.99



Monoprice 5-Port 10/100/1000Mbps Gigabit Ethernet Unmanaged Switch Network Hub picture

Monoprice 5-Port 10/100/1000Mbps Gigabit Ethernet Unmanaged Switch Network Hub

$8.99



~NIB~ Netgear GS728TPP-300NAS V3 24 PORT GIGABIT POE MNGD W. 4 SFP PORTS picture

~NIB~ Netgear GS728TPP-300NAS V3 24 PORT GIGABIT POE MNGD W. 4 SFP PORTS

$349.95



TP-Link TL-SG1048 48-Port Gigabit Rackmount Switch New Factory Sealed picture

TP-Link TL-SG1048 48-Port Gigabit Rackmount Switch New Factory Sealed

$199.99