-
Junior Member
registered user
Trying to move from Knppix 4.0 to 5.0
I've been doing OK with Knoppix 4.0 live CD and live DVD for 6 months now. I am now trying to get Knoppix 5.0 live dvd to work on my PC but nothing much works: (I have a diskless Pentium with a flash memory stick).
1) All cheat codes are ignored. Therefore my configuration file isn't found.
2) Control settings are fixed and can't be changed. Therefore I am stuck at a screen resolution of 640x480 with a 20" monitor.
3) K menu pages auto paint with no margin so open when I don't want them and they can't be closed without selecting an unwanted link.
Do I have a defective DVD? Does 5.1 solve any of these problems? 5.0 appears to be a massive step backwards from 4.0, so please tell me I am missing some little obvious thing I must do to make it all cooperate! Thanks.
-
Administrator
Site Admin-
5.0.1 and even 5.1.0 do seem to be a hugh step backweards in some ways, particularly support (or lack of it) for wireless networking. They also introduced some new interfaces that likely woukld keep old configuration files from working right, but Idon't know of any reason that you are having all of the problems that you report. You're the best judge if it's a bad disc, but it doesn't really sound like it is to me. As long as you burned it at slow speed and it passed the verification test when burning it's likely good. If you want to stay with 5.x and don't care about wireless networking, I would think it would be reasonable to try 5.1.0. By the way, I and others are not seeing the 640x480 problem that you have, it might be hardware specific but if 4.02 did a higher resolution I don't know why you shouldn't expect that from 5.x.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Junior Member
registered user
Thanks for the input...
Yes, Knoppix 4.0 puts me at at 1024 x 768 resoultion and gave me a choice of resolutions in the control settings. Knoppix 5.0 gives only the 640 x 480 choice. Is there any way to force a .tbz configuration file to be adopted after the startup procedure is complete? I have a lot of time invested in the favorite places, but I suppose I can export and the re-import these...
Similar Threads
-
By fingers99 in forum Hdd Install / Debian / Apt
Replies: 5
Last Post: 03-12-2006, 11:59 PM
-
By Coorme in forum General Support
Replies: 2
Last Post: 07-13-2004, 07:14 AM
-
Replies: 0
Last Post: 03-11-2004, 07:55 AM
-
By BigM in forum Networking
Replies: 0
Last Post: 03-10-2004, 09:34 AM
-
By marlinswin in forum Networking
Replies: 8
Last Post: 06-24-2003, 04:21 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 - 4X S25G NICs
$1999.97

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99

Dell R740XD VxRail P570 24x 2.5” 2U CTO Server– 2x Gold 6240, H740p, 2x 1600W
$699.00

Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99

Dell PowerEdge VRTX Rackmount Chassis w/4x PSUs 2x CMC Modules
$399.98

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08

AS IS READ DESCRIP. Supermicro SuperServer 6026TT-HIBQRF 12-Bay 4x X8DTT-HIBQF
$215.00