Results 1 to 7 of 7

Thread: cloop problem with knoppix 5.1

  1. #1
    Member registered user
    Join Date
    Jul 2006
    Location
    toronto, canada
    Posts
    87

    cloop problem with knoppix 5.1

    I have downloaded knoppix 5.1 cd, did the md5 checksum, but when I booted it from cd, it couldn't find
    /cdrom/KNOPPIX/modules/cloop.ko. I tried the testcd cheat, but it doesn't give any message. I wound up in a very limited command-line shell. I looked up the file through Windows 2000 and found it. I was using 5.0 with no problem.

    My machine is a no-name P4 with 256M ram, 1.6GHz, 40G hard-drive. I've tried it on both CD drives, a Sony CRX230E, and LG CRD-8521B.

    Has anyone else had a problem with the cloop file under 5.1 ?

  2. #2
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    It has worked fine for me. Your problem sounds like it may have been caused by a high speed burn, or a marginal reader or marginal media.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  3. #3
    Member registered user
    Join Date
    Jul 2006
    Location
    toronto, canada
    Posts
    87
    I tried a slowest burn on a CD-RW. Perhaps I should try a CD-R (which I have been using in the past). I'll try this after my daughter's optometrist appointment. (I have a few things to take care of before she returns to university)

  4. #4
    Member registered user
    Join Date
    Jul 2006
    Location
    toronto, canada
    Posts
    87
    I tried another burn on a CD-R. I have knoppix 5.1 now! It must have been a bad burn, although testcd didn't reveal anything wrong.

  5. #5
    Junior Member
    Join Date
    Jan 2007
    Posts
    5
    Quote Originally Posted by ndb
    I tried another burn on a CD-R. I have knoppix 5.1 now! It must have been a bad burn, although testcd didn't reveal anything wrong.
    I confirm this bug...for me the CD gives me this error in 50% of case...

  6. #6
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by willemijns
    Quote Originally Posted by ndb
    I tried another burn on a CD-R. I have knoppix 5.1 now! It must have been a bad burn, although testcd didn't reveal anything wrong.
    I confirm this bug...for me the CD gives me this error in 50% of case...
    What are you confirming, that 1/2 of your burns are bad? That would seem to be a confirmation that you have marginal media, a flakey drive, or that you burn too fast, not a "bug" in Knoppix. If you are confirming that half of your downloads are bad then you are using the mirrors and are seeing what I saw for years before BitTorrent feeds were available, I would suggest that you learn to use BitTorrent.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  7. #7
    Junior Member
    Join Date
    Jan 2007
    Posts
    5
    Quote Originally Posted by Harry Kuhman
    I confirm this bug...for me the CD gives me this error in 50% of case...
    What are you confirming, that 1/2 of your burns are bad?.[/quote]

    sorry, my sentence could be mispellled i actually have this probleme of "cloop.ko"
    in 5.1.0 in 50% of case... my CD is good with "knoppix testcd" and i have no problem with 5.0.1

Similar Threads

  1. Problem with cloop.o & minirt.gz / Knoppix 3.8.1
    By sand in forum Customising & Remastering
    Replies: 1
    Last Post: 05-13-2005, 09:51 PM
  2. Problem with cloop
    By lrathle in forum Customising & Remastering
    Replies: 2
    Last Post: 09-05-2004, 05:47 PM
  3. problem with cloop
    By sabel in forum Customising & Remastering
    Replies: 2
    Last Post: 12-01-2003, 09:15 PM
  4. problem with cloop module...
    By Myrdhin in forum Customising & Remastering
    Replies: 2
    Last Post: 08-01-2003, 02:54 PM
  5. Problem with cloop
    By arkaine23 in forum Customising & Remastering
    Replies: 2
    Last Post: 07-08-2003, 05:57 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00



Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD picture

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD

$119.99



Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR picture

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR

$95.20



Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB

$149.99



NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER picture

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER

$1499.97



Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU picture

Datto S4P10 1U Blade Rack Server Intel Xeon D-2143IT 2.20GHz 48GB DDR4 4-Bay PSU

$229.95



Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays picture

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays

$799.99



Dell PowerEdge VRTX 2.5

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)

$1599.99



Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working picture

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working

$149.99



Dell Poweredge VRTX 25Bay 2.5

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS

$578.08