my guess is that your USB chipset is not working as USB2 but as USB1.1.
tre the command below in a konsole.
sudo modprobe ehci
hi all,
I tried to take a dd image of 1 gb usb pen drive in redhat EL4 it took abt 2 mts, i tried the same in debian also, installed in the same machine. it also took abt 2 mts.. but when i tried to take the dd image in knoppix it took nearly about 16mts... Why is this??? is it because dma is not enabled in knoppix... then how could i enbale this for usb devices. when i give the cheatcode knoppix dma it enables the dma for harddisk only.
How could i increase the speed.??????????
plz help
Viji.R
my guess is that your USB chipset is not working as USB2 but as USB1.1.
tre the command below in a konsole.
sudo modprobe ehci
when i type the command i am getting the following error
'FATAL: Module ehci not found."
plz help
ok when i gave
modprobe ehci-hcd
it worked
thanx a lot
regards viji

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
Tested WD Ultrastar DC HC520 12TB 7.2K RPM SATA 6Gb/s 3.5" HDD HUH721212ALN600
$239.99
HGST Ultrastar HUS726040AL5210 4TB 7200RPM SAS 12Gb/s Enterprise HDD
$41.00
Seagate Barracuda ST1000DM003 1 TB SATA III 3.5 in Desktop Hard Drive
$23.99
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Toshiba DT01ACA100 1 TB 3.5" SATA III 3.5 in Desktop Hard Drive
$24.99
Seagate ST3000NM0005 HDD 3TB SATA 6Gb/s 7.2K 3.5" 512 b/s
$59.00
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
New Western Digital WD40EFPX 68C6CN0 4TB 3.5" SATA III Internal NAS Red Plus HDD
$137.59