Results 1 to 4 of 4

Thread: Can't save knoppix configuration

  1. #1
    Junior Member
    Join Date
    Jan 2007
    Posts
    6

    Can't save knoppix configuration

    Hi. I'm a newbie to Knoppix, but have figured out how to save my Knoppix configuration, and have successfully done this several times. However, for no reason I can think of, it's suddenly stopped working. There's plenty of room on the hard drive for it, so that can't be a problem. The error message only tells me that it can't save my configuration for me, which isn't a lot of help.

    Anything I can do to fix it, short of wiping the configuration files and starting again, which I'm unwilling to do if there's a sensible alternative?

  2. #2
    Senior Member registered user
    Join Date
    Jan 2005
    Location
    UK
    Posts
    282
    Steve, have you installed knoppix to your hard drive, if so, after running knoppix-installer which option did you choose?

    If you choose "knopiix cd like" then you cant save any configuration as it emulates the live cd. You must start with either the beginner option or
    debian type system. If you have then at a terminal type
    dmesg | grep
    (The | is the "pipe" key not 1 or l)
    There may be info in the system log to help you use page up pge down o scroll and q to quit

  3. #3
    Junior Member
    Join Date
    Jan 2007
    Posts
    6
    Nope, I've not installed Knoppix as yet; I'm still trying to get the hang of it before I decide whether to install it (or some other version of Linux). I'm running it from the CD and attempting -- with some success -- to save my configuration (primarily Firefox extensions and settings) to hdb1 (I've got two drives on my PC) so that I can later reboot using knoppix myconfig = scan to get all my Firefox stuff back. Sometimes this works and sometimes it doesn't.

    After posting my initial question I eventually thought I'd re-start from scratch, so I rebooted in Windows, wiped all the Knoppix-related stuff and started again. Most of the time I can now save my configuration, but sometimes it just refuses to let me. Then I just reboot a few times and, eventually, I get to save the new extension I've been trying to keep.

    Most recently, I installed RealPlayer and managed to pursuade Knoppix to save it for me so I didn't have to reinstall it every time I restarted my PC. It hung around on the desktop for a bit and then vanished with neither trace nor good reason that I could tell.

    Presumably I'm doing something wrong, but I can't think of anything I'm doing differently on the occasions Knoppix doesn't want to play.

  4. #4
    Member registered user
    Join Date
    Mar 2005
    Posts
    77
    The desktop should be used for icons, small programs and notes. Especially using configuration. If you have HDD space move RealPlayer there instead. Play it from there or make an icon on the desktop.
    Also look in the knoppix/media file and 'ls' it and you'll see the HDD files like hda5 or whatever you hard drive set up is. go there (cd) and you'll see knoppix.sh and configs.tbz files. These files save your config. make a copy of each, in root, (i.e. sudo cp knoppix.sh knoppix0.sh) and now you can reconfig again. Also with kwrite make notes of what you did and when.

    Two other things to mention.
    1. Configuration to floppy will save bookmarks from Firefox/Iceweasel, as a result, many cheap & easy backups.
    2. Have you looked into persistent home? Here you can make your desktop as trashy as you want. hee hee
    (In persistent home you will have a OK box to check during the boot)

    hth any

Similar Threads

  1. Save KNOPPIX configuration in 5.3.1
    By dstarke in forum General Support
    Replies: 5
    Last Post: 08-26-2008, 02:45 PM
  2. How to save configuration in Knoppix 4.0.2
    By kpfuser in forum General Support
    Replies: 5
    Last Post: 10-10-2006, 10:06 PM
  3. Save knoppix configuration to file?
    By TP Diffenbach in forum General Support
    Replies: 0
    Last Post: 06-20-2005, 11:02 AM
  4. knoppix configuration save, and installing ddd via rpm ???
    By metafizz in forum General Support
    Replies: 0
    Last Post: 04-22-2004, 09:29 AM
  5. Where is the Save Knoppix configuration script?
    By pelican in forum General Support
    Replies: 4
    Last Post: 02-07-2004, 01:43 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU picture

INTEL XEON E5-2680V4 SR2N7 2.40GHZ CPU

$11.00



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS picture

Dell Precision Tower 7810 Xeon E5-2630 v3 @ 2.40GHz , 32GB Ram, NO HDD, NO OS

$239.99



Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00



Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS picture

Dell Precision T5820 Workstation 3.70GHz W-2135 No RAM/ GPU/ HDD/ OS

$179.98



Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA picture

Dell Precision T7820 2x Xeon Silver 4114 2.20GHz 950W No RAM GPU HDD 4x SATA

$350.48



Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS picture

Intel Xeon E5-2699 V4 2.20GHz 55M 22-CORES LGA2011-3 Server Processor 145W SR2JS

$84.49



Matched Pair _ Intel Xeon E5-2698 V4 2.2GHz 20-Core Processor CPU LGA2011 SR2JW picture

Matched Pair _ Intel Xeon E5-2698 V4 2.2GHz 20-Core Processor CPU LGA2011 SR2JW

$94.99



DELL Precision T3420 | Xeon 1240v6 | 525GB SSD |16GB RAM |Nvidia GPU |Win11 picture

DELL Precision T3420 | Xeon 1240v6 | 525GB SSD |16GB RAM |Nvidia GPU |Win11

$149.00



Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD picture

Dell PowerEdge R530 2x E5-2630v4 H330 iDRAC8 Port Card Riser No PSU/RAM/HDD

$99.99