-
Junior Member
registered user
The Torrent (for knoppix download)
Can somebody tell me why using this torrent takes 20 hours to download Knoppix??
I can download the .ISO itself within 1 hour, but I only have 45 minutes right now...
I just want to know if torrents are this slow all the time or not... I've wondered this for awhile now.
-
Administrator
Site Admin-
BitTorrent is by design slow if you have not properly configured your system to let others share the parts that you already have. This usually involves forwarding a port in your router (you are using a router, right?) and allowing inbound connections to BitTorrent in any software firewall.
It is my experience that if you have done these then BitTorrent will be much faster than the mirrors. There are more details (port numbers and such) in the downloading faq and on the official BitTorrent site.
Be sure that you set your upload speed to a reasonable setting for your Internet service. I've seen the auto setting set it too high, and if you overwhelm the uplink completely with traffic then it can slow your ability to send requests for download blocks. My rule of thumb is about 23 to 24k bytes upload for every 256kbit upload capacity you have and you'll be fine (if you have 1 meg up use about 92k up to keep it from impacting your download).
My comments apply only to the official BT client. If you use one of the other clients it's up to you to be sure it isn't infesting your system or causing other problems. Most other clients are likely ok but there are some issues.
BT does start slow but builds speed nicely. Don't just look after the first minute at it's estimated time to download, look again in 5 and then 10 minutes and see if it isn't gaining speed.
-
Junior Member
registered user
Similar Threads
-
By 77yrold in forum General Support
Replies: 1
Last Post: 10-11-2009, 05:39 AM
-
By dbknoppix in forum General Support
Replies: 1
Last Post: 05-26-2009, 12:07 AM
-
Replies: 3
Last Post: 08-28-2007, 08:50 PM
-
By eman45008 in forum The Lounge
Replies: 11
Last Post: 10-13-2004, 10:41 PM
-
By ptayanvo in forum General Support
Replies: 2
Last Post: 01-20-2004, 12:12 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell EMC PowerEdge R740 8 Bay Server w/ 32GB RAM 2x GOLD 6132 2x 1600W PSU H730p
$499.88

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD
$275.00

Dell Intel X710-DA2 5N7Y5 Dual-Port 10GbE SFP+ PCIe 3.0 x8 Network Adapter
$27.50

Dell Poweredge R630 2x Xeon E5-2680 v3 2.5ghz 24-Cores / 64gb / Raid / 2x 1Tb
$374.99

Dell PowerEdge R730 8 Bay Server 64Gb 1x80Gb SSD 3x900Gb SAS 2x12c v4CPU Proxmox
$620.00

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W
$484.99

Dell Poweredge R730xd 12LFF 2*2660v4 4*1Gbe h730 2x 750W Server CTO
$308.00

USED Dell EMC PowerEdge R740 BAREBONES Server NO RAM HDD or CPU, 2x 750w PSU 🚚
$170.00

DELL POWEREDGE R340 Server | Xeon E-2126G 64GB RAM PERC H330 (Onboard)
$399.95

Dell EMC VxRail E560F 10-SFF 2*Gold 6230R 2.1GHz No RAM HBA330 iDrac Ent Server
$349.99