OK, if it was me, at this stage I would re-install the Knoppix system from the live CD | DVD (booting with the testcd cheatcode), configure rebuildfstab and ensure hal is running as described in http://www.knoppix.net/forum/viewtopic.php?t=26759
Yes1) Are you able to mount hda1 from the Live CD | DVD ?
None useful to this that I see...if you run whichever of gparted and|or qtparted is on your Knoppix, or a GParted Live CD, does that give any more information?
OK, if it was me, at this stage I would re-install the Knoppix system from the live CD | DVD (booting with the testcd cheatcode), configure rebuildfstab and ensure hal is running as described in http://www.knoppix.net/forum/viewtopic.php?t=26759
When I ran testcd I it said that the kernel image could not be found. I don't understand how this could be when the cd runs so beautifully? And other than not being able to mount my Windoze partition I have no complaints about the hard-disk install from it. I've used it about a month? But I guess I must have a bad download. I guess, I'm off to download the cd again :(
There is one test for the ISO that is never wrong, it will confirm a good or bad download: the md5 checksum. If it is right you don't need to do another download and will gain nothing in doing so.Originally Posted by Israel
There is a chance that a bad burn or bad media resulted in a bad disc that the md5 checksum would not catch. Testcd might or might not catch this. But it's not the right tool for deciding if you had a bad download.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Hi Israel:
You seem to be having the same problems I faced JohnnyH and HarryKuhman both have posted here
http://www.knoppix.net/forum/viewtopic.php?t=26802
My Knoppix DVD checks out fine with Md5Sum using testCD. I find this problem to be mostly since this HAL has appeared. I had teh same problem with PC-BSD installation. You can mount hd1 WinXp or any other with as root
root/ mount /media/hda1 then use the Icons on the desktop to open up in Knoqueror. While I think Knoppix 5.1.1 to be lot better than 4.0 I find wierd stuff like GRUB appearing late and booting taking time to start frequently to be odd.
Sorry I cant give you any suggestions
AJ
root/ mount /media/hda1 doesn't work for me buddy. Thanks for the suggestion though. I just downloaded another copy of Knoppix 5.1 and the checksum matched perfectly. I should be able to set it all back up tonight. If it doesn't work, you'll definitely be hearing back from me.

IBM System X3850-X5 Server w/4x Intel Xeon E7-4870 CPU , 512 GB DDR3 RAM,NO HDD
$1299.99
IBM ADP Server Type 7870 AC1 NO HDD | 128GB RAM PC3L | 2 x Xeon E5620
$199.99
Unused IBM 09P0037 MAINBOARD For RS/6000 7044-170 P-Series
$375.00
IBM QRadar xx29 2x Xeon E5-2650v4 2x 900W PSU M5120 12x 3.5" Bay Server No RAM
$179.99
IBM Power 8 S822L Server 8247-22L POWER8 Enterprise 256GB RAM 2x 00KV626 CPU
$999.99
Compaq ProLiant 1500R 5/100 rack server, Series 3155, with IBM 2.1GB HD, VINTAGE
$295.00
IBM SYSTEM X3500 M3 SERVER 7380AC1 TOWER Server XEON E5620 8GB RAID SEE NOTES
$110.30
IBM System x3550 M3 1U Server 2x Xeon E5645, 192GB RAM, 2x 300GB HDD (7944-AC1)
$150.00
Rare Vintage IBM 93ZZ PowerPC Server Board - MCM Ceramic CPU - 40N1844 - 1.1 lbs
$49.99
Lot of 3 IBM 00JY196 ServeRAID M1210 PCI Express SAS SATA Storage Controller
$68.99