OK, if it was me, at this stage I would re-install the Knoppix system from the live CD | DVD (booting with the testcd cheatcode), configure rebuildfstab and ensure hal is running as described in http://www.knoppix.net/forum/viewtopic.php?t=26759
Yes1) Are you able to mount hda1 from the Live CD | DVD ?
None useful to this that I see...if you run whichever of gparted and|or qtparted is on your Knoppix, or a GParted Live CD, does that give any more information?
OK, if it was me, at this stage I would re-install the Knoppix system from the live CD | DVD (booting with the testcd cheatcode), configure rebuildfstab and ensure hal is running as described in http://www.knoppix.net/forum/viewtopic.php?t=26759
When I ran testcd I it said that the kernel image could not be found. I don't understand how this could be when the cd runs so beautifully? And other than not being able to mount my Windoze partition I have no complaints about the hard-disk install from it. I've used it about a month? But I guess I must have a bad download. I guess, I'm off to download the cd again :(
There is one test for the ISO that is never wrong, it will confirm a good or bad download: the md5 checksum. If it is right you don't need to do another download and will gain nothing in doing so.Originally Posted by Israel
There is a chance that a bad burn or bad media resulted in a bad disc that the md5 checksum would not catch. Testcd might or might not catch this. But it's not the right tool for deciding if you had a bad download.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Hi Israel:
You seem to be having the same problems I faced JohnnyH and HarryKuhman both have posted here
http://www.knoppix.net/forum/viewtopic.php?t=26802
My Knoppix DVD checks out fine with Md5Sum using testCD. I find this problem to be mostly since this HAL has appeared. I had teh same problem with PC-BSD installation. You can mount hd1 WinXp or any other with as root
root/ mount /media/hda1 then use the Icons on the desktop to open up in Knoqueror. While I think Knoppix 5.1.1 to be lot better than 4.0 I find wierd stuff like GRUB appearing late and booting taking time to start frequently to be odd.
Sorry I cant give you any suggestions
AJ
root/ mount /media/hda1 doesn't work for me buddy. Thanks for the suggestion though. I just downloaded another copy of Knoppix 5.1 and the checksum matched perfectly. I should be able to set it all back up tonight. If it doesn't work, you'll definitely be hearing back from me.

OWC Mercury Elite Pro 2 Bay RAID Enclosure with USB 3.2 for Dual 3.5 inch HDDs
$87.99
EMC KTN-SL3 15-Bay Disk Array Enclosure w/2x 303-108-000E Cards, Dual PSU,No HDD
$239.99
Broadcom MegaRAID 9480-8e Fujitsu PRAID EP540e SAS RAID Card (Replac 9380-8e) 8i
$228.00
G-Technology G-SPEED Studio XL 48TB Thunderbolt 2 Storage - Housing Only
$200.00
MegaRAID 9580-8i8e 16-port 12G SAS/SATA/NVMe 8GB PCIe RAID - 05-50076-00
$1619.19
Broadcom LSI 9305-16i 12Gbps SAS-3 PCIe x8 HBA 16-Ports Raid Controller
$64.99
Dell PowerEdge HBA330 LP PCI-E 12GBs RAID SAS Controller Adapter J7TNV
$18.95
NVME M.2 Adapter Card PCIE X16 Splitter Expansion Controller 4-Disk Soft RAID
$24.43
Broadcom 9600-24i RAID Controller PCIe Gen 4.1 Tri-Mode NEW 05-50111-01004
$649.99
Intel VROC Premium RAID Controller Card PCIe Add-On Module VROCPREMMOD
$265.00