my syslinux.cfg file is as follows:

################################################## ################################################## ############
DEFAULT linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix dma noeject noprompt home=/media/sdc2/knoppix.img
TIMEOUT 300
PROMPT 1
DISPLAY boot.msg
F1 boot.msg
F2 f2
F3 f3
LABEL knoppix
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix
LABEL expert
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 initrd=minirt.gz nomce BOOT_IMAGE=expert
LABEL memtest
KERNEL memtest
APPEND foo
LABEL knoppix-txt
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=normal initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix
LABEL debug
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=normal initrd=minirt.gz debug BOOT_IMAGE=debug
LABEL fb1280x1024
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=794 xmodule=fbdev initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix
LABEL fb1024x768
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=791 xmodule=fbdev initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix
LABEL fb800x600
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us apm=power-off vga=788 xmodule=fbdev initrd=minirt.gz nomce loglevel=0 quiet BOOT_IMAGE=knoppix
LABEL dos
KERNEL balder.img
LABEL failsafe
KERNEL linux
APPEND ramdisk_size=100000 init=/etc/init lang=us vga=normal atapicd nosound noapic noacpi pnpbios=off acpi=off nofstab noscsi nodma noapm nousb nopcmcia nofirewire noagp nomce nodhcp xmodule=vesa initrd=minirt.gz BOOT_IMAGE=knoppix
LABEL userdef
KERNEL linux
APPEND ################################################## ################################################## ########

THIS BIT WAS ADDED MANUALLY
dma noeject noprompt home=/media/sdc2/knoppix.img


AS A MATTER OF INTEREST CAN I JUST CHANGE us TO uk TO BOOT INTO A DIFFERENT (uk) LANGUAANGE/KEYBOARD?

thanks