I have a pentium 4 2.6Ghz, 1G ram, 80G (crashed) hard drive, on board video and sound. I have a CD burner and a separate DVD player.
I'm booting knoppix from the DVD drive so I can use the CD burner to try and salvage data.
here is my problem: no matter what boot mode, or cheat codes I use, (following the tips and tricks in cheat codes) I can get to the desktop (a picture of mountains). At the bottom of the screen I see what appears to be a toolbar. When the mouse is working I can scroll to the far left and get a hand. Eventually the whole thing freezes up and I never get the entire desktop or any functionality.
Does knoppix try to load from the hard drive? If so is it possible to boot without use of the hard drive? Could this be a bad CD burn? (I did have a bad one and went back and read the FAQ and reburned it at the slowest possible speed using NERO.) I downloaded using bittorent and checked the MD5 using quickpar. Everything appears kosher as far as that goes.
Thanks for any help,
Stuck in the mountains.

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99
Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00
Seagate Barracuda ST1000DM003 1 TB SATA III 3.5 in Desktop Hard Drive
$23.99
Seagate ST8000NM0075 Enterprise Capacity 3.5 HDD 8TB SAS Hard Drive 8TB EXOS
$184.99
Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99
Western Digital WD Red 4TB NAS Hard Drive WD40EFRX SATA 64MB 3.5" HDD
$95.00
Seagate ST3000NM0005 HDD 3TB SATA 6Gb/s 7.2K 3.5" 512 b/s
$59.00
Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$339.00
HGST Ultrastar HUS726040AL5210 4TB 7200RPM SAS 12Gb/s Enterprise HDD
$41.00
Tested WD Ultrastar DC HC520 12TB 7.2K RPM SATA 6Gb/s 3.5" HDD HUH721212ALN600
$239.99