Results 1 to 2 of 2

Thread: System halts after loading miniroot.gz

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    2

    System halts after loading miniroot.gz

    Knoppix cannot boot, not even in failsafe mode. In normal mode, screen goes black
    after "Loading miniroot.gz.....".

    In failsafe, the last 3 messages are

    >SMP motherboard not detected
    >enabled ExtINT on CPU#0
    >ESR value before enabling vector: 00000002

    Any ideas? I 've got a Soltek SL-75FRV motherboard,
    the lspci -v output is:

    00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189
    Subsystem: VIA Technologies, Inc.: Unknown device 0000
    Flags: bus master, 66Mhz, medium devsel, latency 8
    Memory at e0000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [a0] AGP version 2.0
    Capabilities: [c0] Power Management version 2

    00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b168 (prog-if 00 [Normal decode])
    Flags: bus master, 66Mhz, medium devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: dde00000-dfefffff
    Prefetchable memory behind bridge: cdd00000-ddcfffff
    Capabilities: [80] Power Management version 2

    00:10.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. UHCI USB
    Flags: bus master, medium devsel, latency 32, IRQ 11
    I/O ports at e800 [size=32]
    Capabilities: [80] Power Management version 2

    00:10.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. UHCI USB
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at ec00 [size=32]
    Capabilities: [80] Power Management version 2

    00:10.3 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 82) (prog-if 20)
    Subsystem: VIA Technologies, Inc.: Unknown device 3104
    Flags: bus master, medium devsel, latency 32, IRQ 10
    Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2

    00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3177
    Subsystem: VIA Technologies, Inc.: Unknown device 0000
    Flags: bus master, stepping, medium devsel, latency 0
    Capabilities: [c0] Power Management version 2

    00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Subsystem: VIA Technologies, Inc. Bus Master IDE
    Flags: bus master, medium devsel, latency 32, IRQ 14
    I/O ports at fc00 [size=16]
    Capabilities: [c0] Power Management version 2

    00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50)
    Subsystem: Avance Logic Inc.: Unknown device 4720
    Flags: medium devsel, IRQ 5
    I/O ports at e400 [size=256]
    Capabilities: [c0] Power Management version 2

    01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev b2) (prog-if 00 [VGA]) Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
    Memory at de000000 (32-bit, non-prefetchable) [size=16M]
    Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Expansion ROM at dfef0000 [disabled] [size=64K]
    Capabilities: [60] Power Management version 2
    Capabilities: [44] AGP version 2.0

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Posts
    298

    Re: System halts after loading miniroot.gz

    Quote Originally Posted by thanos
    Any ideas? I 've got a Soltek SL-75FRV motherboard,
    the lspci -v output is:
    So I guess you have another Linux distro running?

Similar Threads

  1. knoppix26 INIT hangs, hda=ide-cd halts, 2.4.27 ok
    By p.lavarre in forum Hardware & Booting
    Replies: 2
    Last Post: 04-01-2005, 11:56 PM
  2. Knoppix halts checking for USB
    By New2Knoppix in forum General Support
    Replies: 1
    Last Post: 11-09-2004, 03:39 AM
  3. Trying to create my own miniroot
    By Triorieel in forum General Support
    Replies: 0
    Last Post: 03-26-2004, 11:59 PM
  4. custom knoppix halts at creating directories on ramdisk
    By coladicooka in forum Customising & Remastering
    Replies: 5
    Last Post: 10-23-2003, 02:10 AM
  5. System halts on USB keychain drive insertion
    By richter in forum General Support
    Replies: 4
    Last Post: 09-26-2003, 10:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Razer Boomslang 1000 First Edition Gaming Mouse Tin Box CD Manual Vintage picture

Razer Boomslang 1000 First Edition Gaming Mouse Tin Box CD Manual Vintage

$449.99



Vintage NEC CDR-1410A 50 Pin SCSI CD-ROM Optical Drive Used picture

Vintage NEC CDR-1410A 50 Pin SCSI CD-ROM Optical Drive Used

$39.99



Vintage Panasonic Sr. Partner RL-H7000 Computer w/Service Manual & DOS Disks Cov picture

Vintage Panasonic Sr. Partner RL-H7000 Computer w/Service Manual & DOS Disks Cov

$275.00



Vintage AppleCD 300i Plus CD-ROM Optical Drive SCSI 1993 Used picture

Vintage AppleCD 300i Plus CD-ROM Optical Drive SCSI 1993 Used

$47.99



Original Vintage Old Style STANDARD Black CD Jewel Case (Heavy Duty) 90g Lot picture

Original Vintage Old Style STANDARD Black CD Jewel Case (Heavy Duty) 90g Lot

$316.95



Vintage Dell AT101W Keyboard Wired Mechanical GYUM90SK PS/2 picture

Vintage Dell AT101W Keyboard Wired Mechanical GYUM90SK PS/2

$59.88



VINTAGE ESS ES1868 16 BIT ISA SOUND CARD COMPAQ 247428-001 - USA SELLER RM2-SC picture

VINTAGE ESS ES1868 16 BIT ISA SOUND CARD COMPAQ 247428-001 - USA SELLER RM2-SC

$24.95



Vintage 1990/91 APPLE MACINTOSH Display Card 670 M0121 820-0600-A UNTESTED picture

Vintage 1990/91 APPLE MACINTOSH Display Card 670 M0121 820-0600-A UNTESTED

$79.90



Vintage Toshiba XM-6201B SCSI 50 Pin CD-ROM Optical Drive Used picture

Vintage Toshiba XM-6201B SCSI 50 Pin CD-ROM Optical Drive Used

$39.99



Vintage Mitsubishi CDVR412 CD-RW Optical Drive SCSI 50 Pin Used picture

Vintage Mitsubishi CDVR412 CD-RW Optical Drive SCSI 50 Pin Used

$47.99