Results 1 to 2 of 2

Thread: System halts after loading miniroot.gz

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    2

    System halts after loading miniroot.gz

    Knoppix cannot boot, not even in failsafe mode. In normal mode, screen goes black
    after "Loading miniroot.gz.....".

    In failsafe, the last 3 messages are

    >SMP motherboard not detected
    >enabled ExtINT on CPU#0
    >ESR value before enabling vector: 00000002

    Any ideas? I 've got a Soltek SL-75FRV motherboard,
    the lspci -v output is:

    00:00.0 Host bridge: VIA Technologies, Inc.: Unknown device 3189
    Subsystem: VIA Technologies, Inc.: Unknown device 0000
    Flags: bus master, 66Mhz, medium devsel, latency 8
    Memory at e0000000 (32-bit, prefetchable) [size=64M]
    Capabilities: [a0] AGP version 2.0
    Capabilities: [c0] Power Management version 2

    00:01.0 PCI bridge: VIA Technologies, Inc.: Unknown device b168 (prog-if 00 [Normal decode])
    Flags: bus master, 66Mhz, medium devsel, latency 0
    Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
    Memory behind bridge: dde00000-dfefffff
    Prefetchable memory behind bridge: cdd00000-ddcfffff
    Capabilities: [80] Power Management version 2

    00:10.0 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. UHCI USB
    Flags: bus master, medium devsel, latency 32, IRQ 11
    I/O ports at e800 [size=32]
    Capabilities: [80] Power Management version 2

    00:10.1 USB Controller: VIA Technologies, Inc. UHCI USB (rev 80) (prog-if 00 [UHCI])
    Subsystem: VIA Technologies, Inc. UHCI USB
    Flags: bus master, medium devsel, latency 32, IRQ 5
    I/O ports at ec00 [size=32]
    Capabilities: [80] Power Management version 2

    00:10.3 USB Controller: VIA Technologies, Inc.: Unknown device 3104 (rev 82) (prog-if 20)
    Subsystem: VIA Technologies, Inc.: Unknown device 3104
    Flags: bus master, medium devsel, latency 32, IRQ 10
    Memory at dfffff00 (32-bit, non-prefetchable) [size=256]
    Capabilities: [80] Power Management version 2

    00:11.0 ISA bridge: VIA Technologies, Inc.: Unknown device 3177
    Subsystem: VIA Technologies, Inc.: Unknown device 0000
    Flags: bus master, stepping, medium devsel, latency 0
    Capabilities: [c0] Power Management version 2

    00:11.1 IDE interface: VIA Technologies, Inc. Bus Master IDE (rev 06) (prog-if 8a [Master SecP PriP])
    Subsystem: VIA Technologies, Inc. Bus Master IDE
    Flags: bus master, medium devsel, latency 32, IRQ 14
    I/O ports at fc00 [size=16]
    Capabilities: [c0] Power Management version 2

    00:11.5 Multimedia audio controller: VIA Technologies, Inc. AC97 Audio Controller (rev 50)
    Subsystem: Avance Logic Inc.: Unknown device 4720
    Flags: medium devsel, IRQ 5
    I/O ports at e400 [size=256]
    Capabilities: [c0] Power Management version 2

    01:00.0 VGA compatible controller: nVidia Corporation NV11 (GeForce2 MX) (rev b2) (prog-if 00 [VGA]) Flags: bus master, 66Mhz, medium devsel, latency 248, IRQ 11
    Memory at de000000 (32-bit, non-prefetchable) [size=16M]
    Memory at d0000000 (32-bit, prefetchable) [size=128M]
    Expansion ROM at dfef0000 [disabled] [size=64K]
    Capabilities: [60] Power Management version 2
    Capabilities: [44] AGP version 2.0

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Posts
    298

    Re: System halts after loading miniroot.gz

    Quote Originally Posted by thanos
    Any ideas? I 've got a Soltek SL-75FRV motherboard,
    the lspci -v output is:
    So I guess you have another Linux distro running?

Similar Threads

  1. knoppix26 INIT hangs, hda=ide-cd halts, 2.4.27 ok
    By p.lavarre in forum Hardware & Booting
    Replies: 2
    Last Post: 04-01-2005, 11:56 PM
  2. Knoppix halts checking for USB
    By New2Knoppix in forum General Support
    Replies: 1
    Last Post: 11-09-2004, 03:39 AM
  3. Trying to create my own miniroot
    By Triorieel in forum General Support
    Replies: 0
    Last Post: 03-26-2004, 11:59 PM
  4. custom knoppix halts at creating directories on ramdisk
    By coladicooka in forum Customising & Remastering
    Replies: 5
    Last Post: 10-23-2003, 02:10 AM
  5. System halts on USB keychain drive insertion
    By richter in forum General Support
    Replies: 4
    Last Post: 09-26-2003, 10:10 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


(New) AMD Ryzen 7 5700X 8 Core 16 Thread AM4 Unlocked 3.4 GHz CPU OEM Tray picture

(New) AMD Ryzen 7 5700X 8 Core 16 Thread AM4 Unlocked 3.4 GHz CPU OEM Tray

$169.99



Lenovo ThinkCentre M920S Sff Intel Core i5 8600 8GB 256GB SSD Windows 11 Pro picture

Lenovo ThinkCentre M920S Sff Intel Core i5 8600 8GB 256GB SSD Windows 11 Pro

$94.99



Apple MacBook Air 13.6” M2 8GB 256GB SSD 2022 MLY33LL/A 8‑Core CPU 8‑Core GPU picture

Apple MacBook Air 13.6” M2 8GB 256GB SSD 2022 MLY33LL/A 8‑Core CPU 8‑Core GPU

$529.95



8-core 10-core GPU baseboard 8654 to PCIE 5.0x16 GPU expansion baseboard picture

8-core 10-core GPU baseboard 8654 to PCIE 5.0x16 GPU expansion baseboard

$377.77



AMD Ryzen 7 7800X3D 8-Core 16-Thread 4.2GHz/5.0GHz Socket AM5 picture

AMD Ryzen 7 7800X3D 8-Core 16-Thread 4.2GHz/5.0GHz Socket AM5

$275.00



AMD Ryzen 7 9800X3D 8-Core AM5 CPU 4.7GHz 96MB L3 8MB L2 100MHz picture

AMD Ryzen 7 9800X3D 8-Core AM5 CPU 4.7GHz 96MB L3 8MB L2 100MHz

$389.99



MacBook Air 13 2020 M1 8-Core CPU 7-Core GPU 8GB RAM 256GB Storage Gold picture

MacBook Air 13 2020 M1 8-Core CPU 7-Core GPU 8GB RAM 256GB Storage Gold

$399.00



Lenovo LOQ 15 15.6

Lenovo LOQ 15 15.6" FHD 144Hz 8-Core i5-12450HX 16GB 512GB SSD GeForce RTX 4050

$760.00



CHUWI 15.6'' Laptop Computer Intel Core 8GB RAM 512GB SSD WiFi Windows 11 picture

CHUWI 15.6'' Laptop Computer Intel Core 8GB RAM 512GB SSD WiFi Windows 11

$269.99



Dell Inspiron 5570 8GB RAM 256GB SSD Intel Core i5-8250U@1.60GHz Laptop picture

Dell Inspiron 5570 8GB RAM 256GB SSD Intel Core [email protected] Laptop

$126.65