-
Junior Member
registered user
unable to get vpn connections to work
Getting strange behavior using vpnc to connect to a cisco vpn:
all works great when connected to a router (NAT)
when used in config without a router (common cable modem setup), it connects to the vpn, but does not pass "real" traffic
pings work, sometimes text on webpages (but not images), but cannot transfer files or run server side apps.
It looks like an mtu issue, but several fixes for that have no effect.
Also have tried :
upgrade vpnc - didn't work
downgrade vpnc (to the version on knoppix 3.3) - didn;t help
this appears to be a bug in the TUN driver in the kernel ?
a test with ubuntu 7.04 (feisty) live cd does not have the problem
has anyone seen this sort f problem or have any ideas?
-
Getting same problem from a Debian 3.1 host to a Cisco PIX.
The infuratiating thing is that the problem comes and goes.
Thought it was an MTU problem but have tried different MTU's all the way along.
The tun device defaults to an MTU of 1390.
Its insane, the ssh response to the box on the other end is quite zippy, but large scp or rsync-via-ssh transfers just jam almost instantly.
-
Junior Member
registered user
It IS infuriating. It acts like an MTU problem, but changing the MTU doesn't help.
I've search extensively and tried many things to find a fix, but so far the only (and almost universal) solution we have found is to work behind a broadband router.
After digging through all the garbage traffic in tcpdumps without a router, we decided that the cleaner network traffic stream with a router makes it worth the minimal cost, so we made it a requirement for our setup.
Maybe I'll have time next week to dig into the Ubuntu kernel and see what's different there that makes it work.
-
Administrator
Site Admin-

Originally Posted by
wbatw
Maybe I'll have time next week to dig into the Ubuntu kernel and see what's different there that makes it work.
That's an interesting approach, but have you tried packet sniffing to see what is different when it works and when it doesn't? Packet sniffing may also give you a better idea of exactly where in the process things are breaking down.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Similar Threads
-
By Frenchie in forum Networking
Replies: 3
Last Post: 08-22-2006, 12:38 AM
-
By norrillous in forum Networking
Replies: 2
Last Post: 07-03-2004, 02:24 AM
-
By Roly-Arg in forum Networking
Replies: 0
Last Post: 04-16-2004, 06:16 PM
-
By CrashedAgain in forum General Support
Replies: 2
Last Post: 10-08-2003, 11:02 PM
-
By aay in forum Hdd Install / Debian / Apt
Replies: 3
Last Post: 05-30-2003, 11:30 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

2-Bay/4-Bay Hard Drive Enclosure for 3.5"/2.5'' SATA HDD/SSD 10Gbps USB-C 3.2
$75.99

OWC Mercury Elite Pro 2 Bay RAID Enclosure with USB 3.2 for Dual 3.5 inch HDDs
$87.99

Broadcom 9600-24i RAID Controller PCIe Gen 4.1 Tri-Mode NEW 05-50111-01004
$649.99

Areca ARC-1882IX-24 (16i4e)24-Port RAID Controller Card w/BBU /HDD Monitor Board
$300.00

Acasis USB 3.2 2 Bay HDD RAID Enclosure for 2.5/3.5" SATA Drives External Array
$55.00

WAVLINK RAID 2 Bay Hard Drive Docking Station SATA 2.5/3.5'' SSD HDD Enclosure
$119.99

Dell PowerEdge HBA330 LP PCI-E 12GBs RAID SAS Controller Adapter J7TNV
$18.95

NVME M.2 Adapter Card PCIE X16 Splitter Expansion Controller 4-Disk Soft RAID
$24.43

Intel VROC Premium RAID Controller Card PCIe Add-On Module VROCPREMMOD
$265.00

CalDigit VR minin 2 Portable Raid Storage On The Go
$75.00