-
graphic card problem?
Hi
Firstly sorry for my bad english its not my native language.
i am from Turkey a knoppix user. i tried knoppix v3.2 live cd in my intel 810 chipset mainboard with 4 mgbyte onboard graphic card and celeron 466 processor with 128 mgbyte sd ram. but when it boot it appears a blank black screen and monitor turns off with a woman sound after it saying "misconfi.... started in sequence bla bla
)
is it because my graphic card.
with this hardware which knoppix distribution can i use in my pc . and how can i solve this problem
Thanks alot
BAHADIR
-
Senior Member
registered user
Hi,
This may help; when you get the prompt
boot:
enter
knoppix vsync=60
-
Administrator
Site Admin-
That likely is not what the woman said.
Your black screen problem may be Knoppix trying to run higher resolution or scan rates than your monitor supports. It could also be a driver issue for the hardware but with that vintage hardware that seems less likely, even with that very old version of Knoppix. Read the wiki section on cheat codes, look up what your particular monitor is capable of (either with documentation that came with it or you should be able to find the information on the Internet) and try using the cheat codes to force a resolution that your monitor accepts. Don't use hsync or vsync rates higher than your monitor is made for and force screen= to something low (like 640x480) and, if it works, start working your way up.
The cheat code xmodule=vesa may help also, but I would try the above first.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
knoppix xmodule=vesa helped thanks alot 
if possible i want to ask another question. my knoppix version is 3.2 it has no knoppix installer. i want to install it to harddrive. which knoppix distrubition has GUI installer?
Thanks alot
BAHADIR
-
Administrator
Site Admin-
Knoppix should not be installed to hard disk. There are many problems when you do. You would be much better of installing a distro intended for hard disk. If you install Debian you can then install any or all applications included with Knoppix, and you will have a much more stable sytem and be able to install other applications not included with Knoppix. If you have a high speed Internet connection, I suggest doing a net-install of Debian.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
Similar Threads
-
By Roger Wilco in forum Hardware & Booting
Replies: 0
Last Post: 05-18-2004, 02:11 PM
-
By pablodc in forum Hardware & Booting
Replies: 3
Last Post: 03-14-2004, 05:23 AM
-
By Legion in forum Hardware & Booting
Replies: 7
Last Post: 03-12-2004, 07:51 PM
-
By Zend_DV in forum Hardware & Booting
Replies: 3
Last Post: 02-03-2004, 01:42 PM
-
By Eraser in forum Hardware & Booting
Replies: 1
Last Post: 02-14-2003, 05:56 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 - 4X S25G NICs
$1999.97

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99

Lot of 3 Dell PowerEdge Blade Server HHB005 x2 HHB006 x1
$256.49

Dell PowerEdge FX2 FX2s Server 10GbE CMC Blade Enclosure Chassis
$274.99

LOT (8) Cisco UCS UCSB-B200-M5 2x6248R 24 core 3.0G 24x64g DDR4-2933 ram
$112000.00

Dell PowerEdge VRTX Rackmount Chassis w/4x PSUs 2x CMC Modules
$399.98

Dell R740XD VxRail P570 24x 2.5” 2U CTO Server– 2x Gold 6240, H740p, 2x 1600W
$699.00

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$96.60

NEW DELL TRUSTED PLATFORM MODULE TPM 2.0 POWEREDGE T430 T630 G13 SERVERS K98XH
$199.00