Results 1 to 5 of 5

Thread: graphic card problem?

  1. #1

    graphic card problem?

    Hi
    Firstly sorry for my bad english its not my native language.
    i am from Turkey a knoppix user. i tried knoppix v3.2 live cd in my intel 810 chipset mainboard with 4 mgbyte onboard graphic card and celeron 466 processor with 128 mgbyte sd ram. but when it boot it appears a blank black screen and monitor turns off with a woman sound after it saying "misconfi.... started in sequence bla bla )
    is it because my graphic card.
    with this hardware which knoppix distribution can i use in my pc . and how can i solve this problem

    Thanks alot
    BAHADIR

  2. #2
    Senior Member registered user
    Join Date
    Feb 2003
    Location
    England
    Posts
    177
    Hi,
    This may help; when you get the prompt

    boot:

    enter

    knoppix vsync=60

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    That likely is not what the woman said.

    Your black screen problem may be Knoppix trying to run higher resolution or scan rates than your monitor supports. It could also be a driver issue for the hardware but with that vintage hardware that seems less likely, even with that very old version of Knoppix. Read the wiki section on cheat codes, look up what your particular monitor is capable of (either with documentation that came with it or you should be able to find the information on the Internet) and try using the cheat codes to force a resolution that your monitor accepts. Don't use hsync or vsync rates higher than your monitor is made for and force screen= to something low (like 640x480) and, if it works, start working your way up.
    The cheat code xmodule=vesa may help also, but I would try the above first.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  4. #4
    knoppix xmodule=vesa helped thanks alot
    if possible i want to ask another question. my knoppix version is 3.2 it has no knoppix installer. i want to install it to harddrive. which knoppix distrubition has GUI installer?

    Thanks alot
    BAHADIR

  5. #5
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Knoppix should not be installed to hard disk. There are many problems when you do. You would be much better of installing a distro intended for hard disk. If you install Debian you can then install any or all applications included with Knoppix, and you will have a much more stable sytem and be able to install other applications not included with Knoppix. If you have a high speed Internet connection, I suggest doing a net-install of Debian.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

Similar Threads

  1. Add-on graphic card problem
    By Roger Wilco in forum Hardware & Booting
    Replies: 0
    Last Post: 05-18-2004, 02:11 PM
  2. KNOPPIX_V3.3-2003-09-24: Intel 845 Graphic Card Problem
    By pablodc in forum Hardware & Booting
    Replies: 3
    Last Post: 03-14-2004, 05:23 AM
  3. Graphic card problem?- screen flickers etc. HELP!
    By Legion in forum Hardware & Booting
    Replies: 7
    Last Post: 03-12-2004, 07:51 PM
  4. Graphic card problem
    By Zend_DV in forum Hardware & Booting
    Replies: 3
    Last Post: 02-03-2004, 01:42 PM
  5. incompatibility with voodoo5 graphic card.....
    By Eraser in forum Hardware & Booting
    Replies: 1
    Last Post: 02-14-2003, 05:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


TP-Link 5-Port Gigabit Unmanaged Ethernet Switch Network Expansion TL-SG105 picture

TP-Link 5-Port Gigabit Unmanaged Ethernet Switch Network Expansion TL-SG105

$19.95



5Ports Gigabit Network Switch w/ 4 PoE+ Ports Total 52W each port 30W Plug&Play picture

5Ports Gigabit Network Switch w/ 4 PoE+ Ports Total 52W each port 30W Plug&Play

$31.99



Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch picture

Cisco Catalyst 2960-48TT-L 48-Port Fast Ethernet Managed Rackmount Switch

$46.99



10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W picture

10-Port Gigabit PoE Network Switch with 8 PoE+ Ports with 2 Combo SFP Slots 125W

$39.99



Cisco Catalyst 2960-24TT-L 24-Port Fast Ethernet Managed Switch picture

Cisco Catalyst 2960-24TT-L 24-Port Fast Ethernet Managed Switch

$39.99



TP-LINK TL-SG108 8-Port Gigabit Unmanaged Desktop Switch RJ-45 New in Box picture

TP-LINK TL-SG108 8-Port Gigabit Unmanaged Desktop Switch RJ-45 New in Box

$23.99



TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597 picture

TP-Link TL-SG2210P 10-Port Gigabit Smart Switch w/ 8-Port PoE+ NO AC SKU 25597

$39.99



Linksys 8-Port Managed Gigabit PoE+ Switch 110W w/ 2 Uplink Gigabit - LGS310MPC picture

Linksys 8-Port Managed Gigabit PoE+ Switch 110W w/ 2 Uplink Gigabit - LGS310MPC

$49.02



NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (Gs305) - Desktop Quiet Fanless picture

NETGEAR 5-Port Gigabit Ethernet Unmanaged Switch (Gs305) - Desktop Quiet Fanless

$22.00



Cisco Catalyst WS-C2960+24TC-S 24-Port Gigabit Managed SFP Switch picture

Cisco Catalyst WS-C2960+24TC-S 24-Port Gigabit Managed SFP Switch

$39.99