Results 1 to 3 of 3

Thread: Can't get write access to my Windows partition

Hybrid View

  1. #1
    Junior Member
    Join Date
    Aug 2007
    Posts
    4

    Can't get write access to my Windows partition

    I am having trouble getting write access to my Windows partition, which fails to boot now. I want to try to try some repair techniques but it requires moving files around, which requires write access.

    It is an NTFS partition.

    On Knoppix, it mounted the device as:

    /dev/hda1 on mount point /media/hda1

    The first thing I tried doing, is right-clicking the hard disk icon on desktop and chose "change read/write mode". Said yes to the popup and then got the following message: "The remount command failed. Maybe there is another process accessing the filesystem currently".

    Then I looked online and found a command I could try on the command line, so I wrote it as this:

    mount -t ntfs -o rw /dev/hda1 /media/hda1

    And I get the following response:
    Failed to mount '/dev/hda1': Operation is not supported
    Mount is denied because NTFS is unclean. Choose one of these actions:
    ...

    The first option had something to do with making sure windows shut down cleanly- not sure how it determines that but anyway this is impossible because windows crashed.

    The last option was to mount in read-only mode. Not what I want.

    So I try the second option which is to run ntfsfix, typing: ntfsfix /dev/hda1
    and it just hanging there. unless this is supposed to take a really long time (over 10 minutes now) then I think it's safe to say it ain't working. (though I am still leaving it to hang there, afraid to try and cancel it. hoping by some miracle it will finish)

    Any other ideas?

  2. #2
    Junior Member
    Join Date
    Aug 2007
    Posts
    4
    It looks like the problem was with my hard drive. It has passed it's prime and due for retirement. R.I.P. my Hitcachi Travelstar...

  3. #3
    Junior Member registered user
    Join Date
    Aug 2007
    Posts
    12
    "The remount command failed. Maybe there is another process accessing the filesystem currently"
    I had that error too. That happened sometimes when I tried to mount my hard disk after I started my internet or internet browser. I fixed it by mounting my hard disk immediately after startup (before starting any program), and then saving my settings in the configuration archive.
    The next time I started Knoppix the problem was solved and mounting was no problem anyway!

    Failed to mount '/dev/hda1': Operation is not supported
    Mount is denied because NTFS is unclean. Choose one of these actions:
    ...
    This problem also appeared at my hard disk lately. I'm not sure how I solved it at that moment....probably it was shutting down Knoppix, booting Windows and starting Knoppix again.
    But...that won't work for you, because your Windows crrrrashed.
    Maybe you could try restarting Knoppix and then immediately mounting the disk after startup?

Similar Threads

  1. Read/Write Access to Windows NTFS parition?
    By blt975 in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 01-13-2004, 10:39 PM
  2. Can't write to my Windows partition
    By Peterobe in forum General Support
    Replies: 2
    Last Post: 07-18-2003, 02:05 AM
  3. Unable to access windows partition as user 'knoppix'
    By area in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 06-30-2003, 07:21 AM
  4. i can't access my windows partition or my 2nd cd
    By Chris in forum Hdd Install / Debian / Apt
    Replies: 2
    Last Post: 02-11-2003, 07:32 PM
  5. windows partition access
    By RdH in forum Hardware & Booting
    Replies: 4
    Last Post: 01-30-2003, 01:34 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch picture

Cisco Nexus N9K-C92160YC-X 48P 25GbE SFP28 6P QSFP+/QSFP28 PE Switch

$439.00



Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module picture

Cisco Acacia DP04QSDD-E25-840 400G QSFP-DD Coherent DCO Transceiver Module

$699.99



Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch picture

Cisco WS-C3650-12X48UR-L 48-Port Stackable Layer 3 8x10G SFP+ Port Switch

$129.99



Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New picture

Cisco Catalyst C9130AXI-B WiFi 6 802.11ax Wireless Access Point Brand New

$101.99



New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US picture

New Sealed Cisco GLC-LH-SMD 1000BASE-LX/LH SFP Transceiver Module *US

$17.00



Cisco Catalyst C9300-48U-E 48-Port UPOE Network Switch picture

Cisco Catalyst C9300-48U-E 48-Port UPOE Network Switch

$650.00



Cisco | N3K-C3232C | 32-Port 100G QSFP Network Switch  W/ 2x PSU, 2x Power Cords picture

Cisco | N3K-C3232C | 32-Port 100G QSFP Network Switch W/ 2x PSU, 2x Power Cords

$240.00



Cisco C9300-48UXM-A Switch 9300 Series 48-port UPoE Network picture

Cisco C9300-48UXM-A Switch 9300 Series 48-port UPoE Network

$874.99



nxa-pac-750w-pe v02 NEW OPEN BOX for Cisco Nexus 9300 Series power supply picture

nxa-pac-750w-pe v02 NEW OPEN BOX for Cisco Nexus 9300 Series power supply

$200.00



NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping* picture

NEW Sealed Cisco SFP-10G-LR 10GBASE-LR SFP+ 1310nm 10km *US Shipping*

$24.00