-
Remastering Distro
So according to this site here:
http://www.knoppix.net/wiki/Knoppix_...ring_Howto#APT
Warning: apt-get upgrade is a BAD IDEA. It will, quite probably,
render your KNOPPIX remaster unbootable, or broken in some way. A far safer method is to only upgrade packages as necessary.
So... I know that what I want to do *WILL* require me using apt-get. But I don't want to break my newly customized Knoppix remaster.
I've seen other remasters, based on Knoppix, that are totally bootable. So I KNOW that using apt-get and STILL having a bootable remaster is possible.
How?
I haven't been able to find any decent info on this how... Can anyone point me in the right direction???\
Thanks...
-
Senior Member
registered user
Because it all depends on what packages are upgraded.
Doing apt-get upgrade causes apt to upgrade almost everything that it can, with limitations in the case of complex dependency manipulations.
apt-get dist-upgrade is even more aggressive and will perform wide-scale package removals and replacements when these are required by major changes to an application package.
The above upgrade methods are designed for, and work with, 'pure' Debian installations.
The safest approach, as you are using Knoppix, is to apt-get install *only* the application packages that you want to install (or maybe upgrade).
Usually (as demonstrated by the many successful remasterings) this is OK, but there are no guarantees - you just *might* be unlucky in the application that you want to install - it may come down to trial and error.
In any case, before doing apt-get install whatever.deb do
apt-get -s install whatever.deb
which will only simulate the installation and will report what it would do.
-
So that leaves me with 2 questions...
1. If I do the "simulation", how can I find out if it breaks the booting?
2. If I DO break the booting, how can I go about fixing it?
-
Senior Member
registered user
1. The only way is to try it - the amount of output the simulation produces is only indicative of how radical the upgrade will be. Be prepared for failures - to minimise burning 'coasters' burn to CD-RW or run the iso image in e.g. VMware Player if you have it.
2. The ways in which the system could 'break' are so open ended that I couldn't predict, nor, probably, advise a fix for them. The cleanest way is to forestall, rather than 'patch', a failure 
... but be not downhearted
. If you update your /etc/apt/sources.list file as advised here
http://www.knoppix.net/forum/viewtopic.php?t=27800
you are very unlikely to have problems.
Similar Threads
-
By cinematography in forum Customising & Remastering
Replies: 1
Last Post: 09-04-2005, 01:07 AM
-
By sancelot in forum Customising & Remastering
Replies: 2
Last Post: 07-28-2004, 01:39 AM
-
By PrOCesSkIlL in forum Customising & Remastering
Replies: 29
Last Post: 04-02-2004, 01:32 AM
-
By silian87 in forum Customising & Remastering
Replies: 4
Last Post: 03-15-2004, 06:46 AM
-
By dbojan in forum Customising & Remastering
Replies: 2
Last Post: 11-04-2003, 10:17 AM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray
$39.99

Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A
$64.00

DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600
$49.95

Seagate ST12000NM0127 12TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$318.99

Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive
$14.99

HGST HUA723030ALA640 3TB SATA 7200 RPM 3.5 in Enterprise HDD | 0F14044 (100%)
$45.00

2TB Seagate Barracuda ST2000DM001 7200RPM SATA 6Gbps 64MB Cache 3.5" HDD
$39.95

Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE
$68.99

(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5" HARD DRIVE
$199.99

Western Digital 2TB WD20EFRX-68EUZN0 3.5" SATA Red NAS Hard Disk Drive
$69.99