Results 1 to 3 of 3

Thread: 3.2-iso can not connect (use DHCP) internet

Hybrid View

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    5

    3.2-iso can not connect (use DHCP) internet

    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    Pinging 127.0.0.1 only tells you that your local (lo) network is up.

    Not sure I follow you- can you ping 192.168.0.1 or not? I assume that 192.168.0.1 is the ip of your DHCP server yes?

    As root:

    # ifconfig -a

    Do you have an ip address on eth0?
    If you don't have an ip address as root try this:

    # netcardconfig

    Here's how to take the network up and down at will.
    # ifdown -a
    # ifup -a
    # ifconfig -a


    If you already have an ip address on eth0 can you ping 204.71.200.67?

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    If you are able to ping 182.168.0.1 then your hardware is working. Try running netcardconfig and doing another DHCP setup. Did that work? Please post the result. If not, try netcardconfig again, but manually set up your card (look at what you are currently using for a DNS server on another system so you'll have that setting when asked for it). Pick a unique IP in the proper range (looks like it's 192.168.0.xxx for you), a mask of 255.255.255.0, and give 102.168.0.1 as your gateway. Again, please post back the result.

    You might also want to try sudo mii-tool -r and then netcardconfig again, although I would do the above first.

Similar Threads

  1. Can't connect to the internet....
    By calathar in forum Networking
    Replies: 12
    Last Post: 05-03-2005, 06:47 AM
  2. Cant connect to the internet
    By simplyskate in forum Networking
    Replies: 10
    Last Post: 04-28-2005, 06:45 PM
  3. HELP!!! I CAN'T CONNECT TO THE INTERNET!
    By vzlandude in forum Networking
    Replies: 15
    Last Post: 04-01-2005, 04:24 AM
  4. connect to the internet
    By sunpascal in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 12-02-2004, 02:08 PM
  5. help! can't connect to internet
    By THiM in forum Hardware & Booting
    Replies: 5
    Last Post: 05-19-2003, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray picture

Dell 6P85J 4TB ST4000NM0063 7.2k 6Gb/s 3.5” SAS SED Hard Drive with Tray

$39.99



Seagate ST8000DM004 8TB 3.5

Seagate ST8000DM004 8TB 3.5" 6Gb/s 256MB SATA HDD P/N: 2CX188-300 Tested

$149.99



Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5

Western Digital HUS726T4TAL5204 4TB 7.2K SAS 12Gb/s 3.5" 512e HDD NetApp X375A

$64.00



(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5

(ST8000NM0045) SEAGATE ENTERPRISE 8TB 7200RPM 4Kn SATA 6Gb/s 3.5" HARD DRIVE

$199.99



Seagate ST500DM009 BarraCuda 500 GB 3.5

Seagate ST500DM009 BarraCuda 500 GB 3.5" SATA III Desktop Hard Drive

$14.99



HGST Ultrastar 7K4000 3TB 7200RPM SATA III 3.5

HGST Ultrastar 7K4000 3TB 7200RPM SATA III 3.5" Hard Drive HDD HUS724030ALA640

$39.99



Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE picture

Dell ST6000NM0034 1HT27Z-150 NWCCG 6TB SAS 3.5 7.2K ENTERPRISE SERVER DRIVE

$68.99



HGST HUA723030ALA640 3TB SATA 7200 RPM 3.5 in Enterprise HDD | 0F14044 (100%) picture

HGST HUA723030ALA640 3TB SATA 7200 RPM 3.5 in Enterprise HDD | 0F14044 (100%)

$45.00



DELL 2TB Enterprise HDD (7200RPM, 3.5

DELL 2TB Enterprise HDD (7200RPM, 3.5", SATA III, 128MB Cache) HUS722T2TALA600

$49.95



Western Digital Red WD60EFRX-68MYMN1 6 TB,Internal,5400 RPM,3.5 inch Hard Drive picture

Western Digital Red WD60EFRX-68MYMN1 6 TB,Internal,5400 RPM,3.5 inch Hard Drive

$179.99