Results 1 to 3 of 3

Thread: 3.2-iso can not connect (use DHCP) internet

Hybrid View

  1. #1
    Junior Member
    Join Date
    May 2003
    Posts
    5

    3.2-iso can not connect (use DHCP) internet

    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .

  2. #2
    Senior Member registered user
    Join Date
    Mar 2003
    Location
    colorado springs, colorado
    Posts
    1,933

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    Pinging 127.0.0.1 only tells you that your local (lo) network is up.

    Not sure I follow you- can you ping 192.168.0.1 or not? I assume that 192.168.0.1 is the ip of your DHCP server yes?

    As root:

    # ifconfig -a

    Do you have an ip address on eth0?
    If you don't have an ip address as root try this:

    # netcardconfig

    Here's how to take the network up and down at will.
    # ifdown -a
    # ifup -a
    # ifconfig -a


    If you already have an ip address on eth0 can you ping 204.71.200.67?

  3. #3
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441

    Re: 3.2-iso can not connect (use DHCP) internet

    Quote Originally Posted by wangcity
    i have two pc , first is DHCP server use windows2000, it use ADSL moden(USB interface). The second use Knoppix 3.2--5.20 ISO.

    but i can not use DHCP connect internet.
    my NIC is 8139too, and knoppix can find it.
    I ping 127.0.0.1 is ok, but can not ping 192.168.0.1

    how can i do it ?

    i already add nameserver in /etc/hosts, and edit reso...conf file , add gateway. and so on. at this time , can ping 192.168.0.1 but still can not get connect : like ping www.yahoo.com it's can not.

    BTW: when i use 3.1 , is all can work fine.

    thanks .
    If you are able to ping 182.168.0.1 then your hardware is working. Try running netcardconfig and doing another DHCP setup. Did that work? Please post the result. If not, try netcardconfig again, but manually set up your card (look at what you are currently using for a DNS server on another system so you'll have that setting when asked for it). Pick a unique IP in the proper range (looks like it's 192.168.0.xxx for you), a mask of 255.255.255.0, and give 102.168.0.1 as your gateway. Again, please post back the result.

    You might also want to try sudo mii-tool -r and then netcardconfig again, although I would do the above first.

Similar Threads

  1. Can't connect to the internet....
    By calathar in forum Networking
    Replies: 12
    Last Post: 05-03-2005, 06:47 AM
  2. Cant connect to the internet
    By simplyskate in forum Networking
    Replies: 10
    Last Post: 04-28-2005, 06:45 PM
  3. HELP!!! I CAN'T CONNECT TO THE INTERNET!
    By vzlandude in forum Networking
    Replies: 15
    Last Post: 04-01-2005, 04:24 AM
  4. connect to the internet
    By sunpascal in forum MS Windows & New to Linux
    Replies: 2
    Last Post: 12-02-2004, 02:08 PM
  5. help! can't connect to internet
    By THiM in forum Hardware & Booting
    Replies: 5
    Last Post: 05-19-2003, 07:27 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM picture

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM

$699.00



Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD picture

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD

$119.99



Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB picture

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB

$149.99



Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working picture

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working

$149.99



Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R picture

Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R

$399.00



Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays picture

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays

$799.99



NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER picture

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER

$1499.97



Dell PowerEdge VRTX 2.5

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)

$1599.99



Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR picture

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR

$95.20



HP ProLiant BL460c Gen8 Blade Chassis w/2x Xeon E5-2630L 2.0GHz, 32GB RAM, No H picture

HP ProLiant BL460c Gen8 Blade Chassis w/2x Xeon E5-2630L 2.0GHz, 32GB RAM, No H

$144.99