-
Wireless not recognizede
I have an HP zd7058cl. Knoppix installed beautifully with one glaring exception. It did not recognize the built in wireless card. I called HP to get a linux based driver, or some support on using the windows one and was told "HP does not support Linux." After telling the tech that his company should join the 21st century I turned my attention hre. HELP I need to convert 3 HP PCs to Linux but without wireless I can't
-
Administrator
Site Admin-
Wireless support depends on what chip set your HP uses. There is a good chance that Linux will support your HP. Try the BackTrack2 Live CD if you want a Live CD with a good chance of supporting your hardware. Mandriva and Puppy Linux may also have the support you need. But Knoppix wireless support is particularly poor and installing Knoppix on a hard disk is usually a mistake unless you are a very experienced user. I would suggest that you find some distro that is intended for hard disk install if that's what you are trying to do.
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
Senior Member
registered user
Re: Wireless not recognizede

Originally Posted by
rebshalom
I have an HP zd7058cl. Knoppix installed beautifully with one glaring exception. It did not recognize the built in wireless card. I called HP to get a linux based driver, or some support on using the windows one and was told "HP does not support Linux." After telling the tech that his company should join the 21st century I turned my attention hre. HELP I need to convert 3 HP PCs to Linux but without wireless I can't
Harry is right about the poor wireless support of knoppix. I wish the next version of knoppix has better support.
However, you still can do it a try on ndiswrapper.
http://www.knoppix.net/wiki/Network_FAQ
Check out the above URL on FAQ 2 & 3 might help you to have the wireless connection. Be careful that even with ndiswrapper, a large portion of the hardware still does not supported. You have to try your luck.
Good luck and have fun.
Rgds,
Chip
-
you should try ubuntu....
-
I've had success with grml and Puppy Linux on my Averatec 3715 laptop. They both recognize my wireless cards without any trouble, so I would try those.
Similar Threads
-
By dtzxdtzx1 in forum Networking
Replies: 2
Last Post: 07-31-2007, 11:20 PM
-
By rpk073 in forum Networking
Replies: 0
Last Post: 10-14-2005, 12:09 PM
-
By sparticus in forum Laptops
Replies: 9
Last Post: 10-23-2004, 12:55 AM
-
By dave52355 in forum Hardware & Booting
Replies: 0
Last Post: 05-04-2004, 09:23 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

Dell PowerEdge FX2s + 8x FC430 Blades 16x E5-2630v4 160 Cores Rails No PSU/RAM
$699.00

Dell PowerEdge FC430 Blade Server 2x Xeon E5-2630v4 20 Cores FX2 FX2s No RAM/HDD
$119.99

Dell PowerEdge M620 Blade Server 2x Xeon E5-2680v2 2.8ghz 20-Cores | 128GB
$149.99

Dell PowerEdge M640 Blade Barebone Server Dell P/N: HHB006 Tested Working
$149.99

NETAPP HCI NAF-1701 SuperMicro Server 4X BLADE H410C 8X GOLD 5120 4 NODE SERVER
$1499.97

Dell Poweredge C6400 24x 2.5’’ 2x 2400W 4x C6420 Nodes H330 | 2x SFP | 8x Trays
$799.99

Dell PowerEdge VRTX 2.5"x25 Bay Blade Enclosure 4x1600W + 4X M640 (4X Blades)
$1599.99

Cisco B200 M3 2x E5-2670V2 10 Core 8x 16GB-128GB Ram Blade Server VIC1240 14900R
$399.00

Dell PowerEdge M630 Blade Server 2x Xeon E5-2680 v4, 2F3MP , 4GDP5 ,R10KJ ,JVFVR
$95.20

Dell Poweredge VRTX 25Bay 2.5" 2x PERC 8, 2xCMC, I/O 1GB Pass Through, 4x PS
$578.08