Results 1 to 9 of 9

Thread: SATA CdRom

  1. #1
    Junior Member
    Join Date
    Dec 2007
    Posts
    3

    SATA CdRom

    I am trying to boot to a knoppix live cd, but I keep getting a message saying "Can't find filesystem". Is there a way to boot to a disk off of a sata cdrom drive. I have tried googling this with no luck.

  2. #2
    Senior Member registered user
    Join Date
    Jan 2005
    Location
    UK
    Posts
    282
    It works fine from my Sata Cdrom, I wonder if you have a corrupt disk image or download.
    Which version of knoppix are you trying and I presume you burnt the disc as an ISO and not just copied the file
    onto a blank cd.

  3. #3
    Junior Member
    Join Date
    Mar 2007
    Posts
    3
    We had that problem with a bunch of systems near the beginning of the year. We did not find a resolution.
    It was worse with Knoppix 3, slightly better with 5.0, and somewhat better with 5.1.1
    Strange thing is - 4 months later, the "same" systems worked fine - new computers with the same model number and specs.
    Our theory is that a newer BIOS fixed the problem. We haven't seen it in systems newer than about June 2007.

    There were some of these systems that would not boot any Live CD at the time. They all had SATA CDROM's.
    We never found a solution, but most would boot from a USB CDROM, and that was sufficient work-around for them.

  4. #4
    Junior Member
    Join Date
    Dec 2007
    Posts
    3
    It's not bad image/disk, because it works great in a non sata cd drive. I just thought that there was some type of fix to get it to recognize the drive.

  5. #5
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by sama
    .... I just thought that there was some type of fix to get it to recognize the drive.
    Working in one drive does not mean that you don't have a marginal media issue caused by high speed burns. But in this case I think that twtt was correct in his post, the some type of fix that you are looking for is to update your bios.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  6. #6
    Junior Member
    Join Date
    Dec 2007
    Posts
    3
    Update the bios, as in the bios for the motherboard, or the cdrom?

  7. #7
    Senior Member registered user
    Join Date
    Apr 2005
    Posts
    159
    Have you tried enabling IDE emulation in the BIOS (or AHCI for that matter, whatever isn't the current setting) ?

    Caveat: if you've got windows running in IDE mode, you'll have to make sure that's how the BIOS is reset before trying to boot windows again.

  8. #8
    Administrator Site Admin-
    Join Date
    Apr 2003
    Location
    USA
    Posts
    5,441
    Quote Originally Posted by sama
    Update the bios, as in the bios for the motherboard, or the cdrom?
    The BIOS refers to the motherboard. It might not be a bad idea to check if there is a firmware update for the SATA CD drive, but from the post made it looks like the BIOS is the most likely fix.
    ---
    Verifying of md5 checksum and burning a CD at slow speed are important.

  9. #9
    Junior Member
    Join Date
    Jan 2009
    Posts
    1
    Setting the bios SATA operation mode to 'Legacy mode' fixed it for us.

Similar Threads

  1. Can't get to SATA partition
    By gred in forum Hardware & Booting
    Replies: 1
    Last Post: 02-24-2008, 10:14 PM
  2. SATA Raid Help
    By Knoppix Noob in forum Hdd Install / Debian / Apt
    Replies: 0
    Last Post: 12-13-2006, 09:16 PM
  3. Knoppix & SATA?
    By Alterscape in forum Hardware & Booting
    Replies: 2
    Last Post: 06-10-2005, 02:35 AM
  4. How can I see a SATA HDD in Knoppix 3.4 ?
    By bloopsys in forum Hdd Install / Debian / Apt
    Replies: 1
    Last Post: 07-18-2004, 10:03 PM
  5. knoppix cdrom boot fails on some cdrom players
    By Koga in forum General Support
    Replies: 3
    Last Post: 01-11-2003, 12:07 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


Dell PowerEdge R620 2x Xeon E5-2630 v2 3.1GHz 2.5

Dell PowerEdge R620 2x Xeon E5-2630 v2 3.1GHz 2.5" 4-BAY 32GB RAM No OS 2x 495w

$174.95



Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram  2x 550W PSU No HDD picture

Dell EMC PowerEdge R440 Xeon silver 4215 2.5GHz 16 GB ram 2x 550W PSU No HDD

$275.00



Supermicro 1027GR-TSF 1U Rackmount Server 2x Xeon 2.3GHz 128GB DDR3 picture

Supermicro 1027GR-TSF 1U Rackmount Server 2x Xeon 2.3GHz 128GB DDR3

$219.99



Microsoft Windows Server 2022 Standard 64-bit License & DVD 16 Core US Shipping picture

Microsoft Windows Server 2022 Standard 64-bit License & DVD 16 Core US Shipping

$34.99



Dell Poweredge R720 8SFF 2.5

Dell Poweredge R720 8SFF 2.5" x Xeon E5-2680 v2 2.8GHz 20-Cores 128gb 4x Trays

$349.99



Dell Poweredge R720 8SFF 2.5

Dell Poweredge R720 8SFF 2.5" 2x Xeon E5-2680 v2 2.8GHz 20-Cores 64gb 4x Trays

$259.99



Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Core | 32GB | HBA330 | 2x 1100w picture

Dell Poweredge R630 2x Xeon E5-2680 v4 2.4ghz 28-Core | 32GB | HBA330 | 2x 1100w

$359.99



Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W picture

Dell PowerEdge C4130 1U AI GPU Server | 2x E5-2680 v3 | 32gb Ram | 2x 1600W

$409.99



WINDOWS SERVER 2025 [REMOTE DESKTOP SERVICES] 50 USER  RDS CAL SEALED picture

WINDOWS SERVER 2025 [REMOTE DESKTOP SERVICES] 50 USER RDS CAL SEALED

$119.18



Windows Server 2025 Standard/Datacenter 64Bit 16/24 Core-Unlimited CALs With Key picture

Windows Server 2025 Standard/Datacenter 64Bit 16/24 Core-Unlimited CALs With Key

$218.95