Hello Harry,

Quote Originally Posted by Harry Kuhman
Quote Originally Posted by dtherio
....and installed WinSCP as recommended...

....I get that same error ....

Any ideas?

Basically I need to copy files......
I know nothing about WinSPC, don't even know what it is or care enough to look it up. However, I've recovered files across a network from a bad windows system to a good windows system with Knoppix many times. If you want to learn more about Linux and WinSPC and what is going wrong here, I can't really be of help. If you want to recover your files, I suggest doing what I already suggested in this thread: Install a free Windows FTP server on the good windows destination system. Boot Knoppix on the "bad" system. Confirm that you can ping the good system (check the firewall of the "good" system if you can't, or recheck your IP addresses). Connect by FTP using Konquror as the FTP client under Knoppix. Check the "good" system's firewall if you can't, or recheck the FTP server configuration. Transfer the files that you want by FPT. It will work and be much faster than any Microsoft based networking. You'll also find it extremely handy to have the skill to download install and configure an FTP server on a WIndows system whenever needed. Takes about 5 minutes or less once you do it a few times.

And, if like the original poster, you are also trying to get wireless networking working under Knoppix, I strongly suggest that you just plug the computer into the network with a wired connection and get your files. Play with wireless after you have the needed data. Wireless support in Knoppix is not good for most hardware.
I can SSH into the knoppix machine remotely, I can ping external machines from the knoppix machine. I have installed an FTP server on another local machine, however, I still can not ftp the files away (nor can I tar/gzip them) as no matter what I do, even though when viewing the properties of the mounted drive show it is writable, when I attempt (from the root terminal) to change the permissions or owner of the directories I need to recover, I get an error saying the drive is read only.

Once I can get past that, I imagine I can probably get the files off the machine. Unless there is a way I am not aware of (quite possible) to ftp the files from the knoppix machine to another one when the knoppix user isn't the owner of the files.

Regards,

Dale

p.s. the drives I am trying to recover files from are Linux, not windows. I have a couple of network drives available as well as a windows machine that I can move the desired files to.