-
-
Administrator
Site Admin-
Re: unable to boot from CD under Windows 2000Server

Originally Posted by
screeny30
...but it does not read the CD
then I tried other CDs like Win98, Ubuntu and they were "readable"

...
It sounds like your CD is bad. And please don't post back that it must be good because it boots on a different machine, that does not prove anything when there is a suspected marginal burn. Did you burn this CD at low speed, as recommended? Did you confirm the md5 checksum of the ISO? Did you use a 700 meg CD and not a 650 meg blank? Do you know how to burn an ISO file as an image?
---
Verifying of md5 checksum and burning a CD at slow speed are important.
-
hi
first thanks for the answer 
but, I don't tell you that the CD must be good
because that was something I was thinking about, too 
but the other things, like "burning at low speed / confirming the md5 checksum" I didn't know because nobody told me
I downloaded the image from a german site and the "Install FAQ" was something like
- download image
- mount the image
- burn it on CD
- start your computer / booting from CD
nothing else 
But yes I burned it on a 700 meg CD and I know how to burn an ISO file as an image 
so thank you for your answer an I will try the thing you told me
-
Administrator
Site Admin-

Originally Posted by
screeny30
but the other things, like "burning at low speed / confirming the md5 checksum" I
didn't know because
nobody told me

Actually, if you follow the documentation link near the top of this page it will take you to the wiki. From there if you read the Downloading FAQ it will cover all of that and more. So we tried to tell you, and I did tell you the very first time that you posted. I guess that we could have come to your house and sat down and talked with you about this before you ever posted, but quite frankly some people get upset when we do this.
-
Well
I found this site after I had problems....
because, as I said, I followed the FAQ on this german site... and it sounded very easy, so I had no reason to look for other FAQs
but coming to my home could be a bit difficult... I live in Germany, but if you want to visit me, I would be honored ^^
so I will try it again and it should work
-
so
I did like the FAQ told me...
I downloaded everything again, but the MD5 Checksums do not match:

Originally Posted by
[b
winMd5Sum[/b]]MD5 Check Sums are different
then I downloaded it from another Mirror... the same thing
what am I doing wrong???
before I waste another CD I want to do everything right

greetz
-
Administrator
Site Admin-

Originally Posted by
screeny30
I did like the FAQ told me...
I downloaded everything again, but the MD5 Checksums
do not match:

Originally Posted by
[b
winMd5Sum[/b]]MD5 Check Sums are different
then I downloaded it from another Mirror... the same thing
Well, for one thing, you are using a mirror. I had only about 50% success rate in getting a good download using mirrors before the Knoppix torrents became available. (If your experience matchs mine the ISO file is slightly larger than it should be as well. If this is the case I can give you more technical details about what is going wrong, but the bottom line is that the download is bad.) The FAQ suggests that using Bittorrent is the best approach. Because of extra error checking done by Bittorrent, it is much more reliable than a mirror download. As long as you take a minute to properly configure your system to let Bittorrent share the torrent while it is downloading, it is much faster than any mirror that I have found as well.
Of course, if that md5 checksum is bad then the CD should not work on any system. This seems to conflict with the "I know the CD is good because it booted on another machine" discussion that we had previously. You are using the same version of the md5 (EN or DE and CD or DVD) as the ISO itself, are you not?
-
Similar Threads
-
By KnoppixIsOk in forum MS Windows & New to Linux
Replies: 5
Last Post: 08-23-2007, 11:27 PM
-
By cmaelo in forum MS Windows & New to Linux
Replies: 2
Last Post: 04-01-2007, 03:45 AM
-
By orzz in forum MS Windows & New to Linux
Replies: 2
Last Post: 10-13-2006, 08:30 PM
-
By JOHNRR12 in forum General Support
Replies: 1
Last Post: 05-08-2004, 12:17 AM
-
By Spacecube in forum General Support
Replies: 4
Last Post: 03-28-2003, 09:14 PM
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
-
Forum Rules

HGST Ultrastar 6TB SATA 3.5" Enterprise HDD HUS726060ALA640 90-99% Health
$79.00

Seagate 6TB HDD ST6000NM0034 7.2K 3.5" SAS 12Gb/s (NOT FOR PC - FOR SERVER ONLY)
$87.00

Dell EMC WD-HITACHI H5H72101CLAR10T0 10TB 7.2K SAS 12Gb/s SED 3.5in A POH 0-50k
$189.99

Seagate BarraCuda ST3000DM008 3TB Internal SATA 6Gb 3.5" Hard Drive 7200RPM 64MB
$91.99

Toshiba 14TB MG07 MG07ACA14TEY 7.2K RPM SATA 6Gb/s 512e 3.5" Enterprise HDD
$299.00

Western Digital WD WD4000FYYZ 01UL1B2 4TB SATA 3.5" HDD 64MB %100 Healthy
$68.99

Seagate ST28000NM001C 28TB 256MB 7200RPM 3.5" SATA 6.0Gb/s Enterprise Hard Drive
$669.99

Seagate Exos ST10000NM002C 10TB CMR 7200RPM SATA6Gb/s 3.5" Enterprise Hard Drive
$279.99

WD Ultrastar DC HC530 14TB SATA 6G 3.5" 7200RPM Enterprise HDD - WUH721414ALE604
$329.99

HDD 3.5" SATA Hard Drive with Windows 10/Win 11 64x Installed Legacy
$35.00